# Tablet/Computer

**URL:** https://discourse.agopengps.com/c/hardware/tablet-computer/47.md

[Latest](https://discourse.agopengps.com/latest.md) · [Categories](https://discourse.agopengps.com/categories.md) · [Tags](https://discourse.agopengps.com/tags.md)

---

## [About the Tablet/Computer category](https://discourse.agopengps.com/t/about-the-tablet-computer-category/2733)

<div class="topic-metadata">

**Author:** [@Richardklasens\_admin](https://discourse.agopengps.com/u/Richardklasens_admin)\
**Replies:** 0\
**Last updated:** [28 August 2020 08:19 UTC](https://discourse.agopengps.com/t/about-the-tablet-computer-category/2733 "2020-08-28T08:19:49Z")

</div>

Suggestions or problems with your Tablet or Computer running AOG? Post it here!

---

## [Power connector for FZ-G1](https://discourse.agopengps.com/t/power-connector-for-fz-g1/19238)

<div class="topic-metadata">

**Author:** [@LookMaNoHands](https://discourse.agopengps.com/u/LookMaNoHands)\
**Replies:** 13\
**Last updated:** [31 May 2026 12:05 UTC](https://discourse.agopengps.com/t/power-connector-for-fz-g1/19238 "2026-05-31T12:05:26Z")

</div>

Hi, A question about the power connector for FZ-G1. The Panasonic connector that came with the FZ-G1 (for use with 120V power) has two parts to the outside of the “barrel”, but the connector I want to use on the tracto…

---

## [Which FZ-G1Tablet to buy](https://discourse.agopengps.com/t/which-fz-g1tablet-to-buy/18186)

<div class="topic-metadata">

**Author:** [@log899](https://discourse.agopengps.com/u/log899)\
**Replies:** 12\
**Last updated:** [5 April 2026 17:28 UTC](https://discourse.agopengps.com/t/which-fz-g1tablet-to-buy/18186 "2026-04-05T17:28:56Z")

</div>

I’m looking to buy a tablet to run Agopen in my tractor this year. I’ve seen the Panasonic FZ-G1 toughpads are the favorite around here. Does it matter which generation i get? They have an MK1 on Amazon for $189 or a M…

---

## [Budget GPS receiver and tablet/computer](https://discourse.agopengps.com/t/budget-gps-receiver-and-tablet-computer/19856)

<div class="topic-metadata">

**Author:** [@CADENC](https://discourse.agopengps.com/u/CADENC)\
**Replies:** 4\
**Last updated:** [3 November 2025 19:39 UTC](https://discourse.agopengps.com/t/budget-gps-receiver-and-tablet-computer/19856 "2025-11-03T19:39:54Z")

</div>

New to AgOpenGPS, so forgive me if this has been discussed before and I have not found the page yet. In search of a quality GPS receiver that has the capability to calibrate AgOpenGPS location by itself with the possibil…

---

## [Tablet for AgOpenGPS - Panasonic CF-D1 or FZ-G1](https://discourse.agopengps.com/t/tablet-for-agopengps-panasonic-cf-d1-or-fz-g1/18668)

<div class="topic-metadata">

**Author:** [@Piotr1](https://discourse.agopengps.com/u/Piotr1)\
**Replies:** 7\
**Last updated:** [3 November 2025 19:32 UTC](https://discourse.agopengps.com/t/tablet-for-agopengps-panasonic-cf-d1-or-fz-g1/18668 "2025-11-03T19:32:29Z")

</div>

What in Your opinion will be better choice for AgOpenGPS: CF-D1 with 13,3" display or FZ-G1 with 10,1" display. Both of that have USB and RJ-45 (LAN) ports. I found something like below: FZ-G1 mk2 256GB/8GB - https://s…

---

## [Buying a tablet in 2025](https://discourse.agopengps.com/t/buying-a-tablet-in-2025/18284)

<div class="topic-metadata">

**Author:** [@alainpierre](https://discourse.agopengps.com/u/alainpierre)\
**Replies:** 10\
**Last updated:** [3 November 2025 19:30 UTC](https://discourse.agopengps.com/t/buying-a-tablet-in-2025/18284 "2025-11-03T19:30:21Z")

</div>

Hello, Previous was closed. Most tablets today have only Wifi and USB, and I bought one of them. I hope to connect AOG to PCB AIO via Wifi, via something like this : slight\_smile: Has someone experimented wifi con…

---

## [USB not stable, considering UDP, or better USB multihub](https://discourse.agopengps.com/t/usb-not-stable-considering-udp-or-better-usb-multihub/18916)

<div class="topic-metadata">

**Author:** [@Steveg93](https://discourse.agopengps.com/u/Steveg93)\
**Replies:** 72\
**Last updated:** [1 November 2025 17:26 UTC](https://discourse.agopengps.com/t/usb-not-stable-considering-udp-or-better-usb-multihub/18916 "2025-11-01T17:26:46Z")

</div>

Hi, I am still having issues with connectivity on my setup. Simple setup, F9P and auto section control kit. I have a few symptoms, which I would like some reassurance on! My tablet only has one USB port, so I am using…

---

## [Tablet mounting](https://discourse.agopengps.com/t/tablet-mounting/19875)

<div class="topic-metadata">

**Author:** [@camritch](https://discourse.agopengps.com/u/camritch)\
**Replies:** 0\
**Last updated:** [13 September 2025 12:17 UTC](https://discourse.agopengps.com/t/tablet-mounting/19875 "2025-09-13T12:17:45Z")

</div>

Back again, with another set of 3D models as my contribution to this community. Some time was spent deliberating over what laptop to buy, before ending up purchasing a used Dell 5310 2 in 1. Why? It was cheap, touch sc…

---

## [Running on a Raspberry Pi with Windows 11 arm64](https://discourse.agopengps.com/t/running-on-a-raspberry-pi-with-windows-11-arm64/9238)

<div class="topic-metadata">

**Author:** [@momrak](https://discourse.agopengps.com/u/momrak)\
**Replies:** 12\
**Last updated:** [26 July 2025 12:28 UTC](https://discourse.agopengps.com/t/running-on-a-raspberry-pi-with-windows-11-arm64/9238 "2025-07-26T12:28:44Z")

</div>

Hi there! New user here who hasn’t actually started using the software yet. I just tried running AgOpenGps on a Windows 11 arm64 build, and it seems to work fine. Since this works I would think that running this on a R…

---

## [Trouble connecting to modules](https://discourse.agopengps.com/t/trouble-connecting-to-modules/19255)

<div class="topic-metadata">

**Author:** [@Damnbuffalo](https://discourse.agopengps.com/u/Damnbuffalo)\
**Replies:** 11\
**Last updated:** [25 April 2025 22:56 UTC](https://discourse.agopengps.com/t/trouble-connecting-to-modules/19255 "2025-04-25T22:56:18Z")

</div>

I am unable to connect to subnet. I am using a USB to UDP adapter. I have followed the steps in the wiki. My last adapter broke and this is a different brand, it was communicating before. Did I miss something or…

---

## [FZ-g1 Screen jumping around](https://discourse.agopengps.com/t/fz-g1-screen-jumping-around/17746)

<div class="topic-metadata">

**Author:** [@aidank](https://discourse.agopengps.com/u/aidank)\
**Replies:** 7\
**Last updated:** [19 November 2024 13:54 UTC](https://discourse.agopengps.com/t/fz-g1-screen-jumping-around/17746 "2024-11-19T13:54:07Z")

</div>

My Setup FZ-g1 connected to F9p connected to aerial. Using USB-A port on tablet and USB C on F9p. Purchased this kit from Ardusimple 2023. simpleRTK2B Basic Starter Kit IP67 - ZED-F9P Evaluation kit (ardusimple.com…

---

## [Buying a tablet in 2023](https://discourse.agopengps.com/t/buying-a-tablet-in-2023/11872)

<div class="topic-metadata">

**Author:** [@basbeuwer](https://discourse.agopengps.com/u/basbeuwer)\
**Replies:** 35\
**Last updated:** [30 October 2024 05:55 UTC](https://discourse.agopengps.com/t/buying-a-tablet-in-2023/11872 "2024-10-30T05:55:59Z")

</div>

hello, i used my dell venue for a while on AOG but it has broken down… and i need so many extra supplies with this tablet that my AIO is no longer that all in one anymore. so for AOG on AIO i wanted to buy a solid and …

---

## [Dell 5290 dock/mount](https://discourse.agopengps.com/t/dell-5290-dock-mount/17806)

<div class="topic-metadata">

**Author:** [@m\_elias](https://discourse.agopengps.com/u/m_elias)\
**Replies:** 3\
**Last updated:** [28 October 2024 17:01 UTC](https://discourse.agopengps.com/t/dell-5290-dock-mount/17806 "2024-10-28T17:01:38Z")

</div>

You guys using the Dell 5290, how are you mounting it? I don’t find any supported dock with ethernet so you’re using USB C to Ethernet adapters and charging through the other USB C port?

---

## [Only one usb in Panasonic FZ-G1](https://discourse.agopengps.com/t/only-one-usb-in-panasonic-fz-g1/12669)

<div class="topic-metadata">

**Author:** [@north](https://discourse.agopengps.com/u/north)\
**Replies:** 11\
**Last updated:** [30 July 2024 19:46 UTC](https://discourse.agopengps.com/t/only-one-usb-in-panasonic-fz-g1/12669 "2024-07-30T19:46:43Z")

</div>

So my FZ-G1 has only one usb and I have ordered AIO 4.1, so I will need rj45. If I have time and skills I would like to install section control for spayer in future. I orderer, in same order with teensy, arduino nano 5…

---

## [Internet connection problem](https://discourse.agopengps.com/t/internet-connection-problem/17074)

<div class="topic-metadata">

**Author:** [@mech\_boy](https://discourse.agopengps.com/u/mech_boy)\
**Replies:** 2\
**Last updated:** [10 July 2024 09:57 UTC](https://discourse.agopengps.com/t/internet-connection-problem/17074 "2024-07-10T09:57:10Z")

</div>

Hello, When i want to set IP it doesn’t say undefined network on the tablet network setting, it says internet cable not connected, has anyone had a similar case?

---

## [Toughpad/book](https://discourse.agopengps.com/t/toughpad-book/399)

<div class="topic-metadata">

**Author:** [@max2019](https://discourse.agopengps.com/u/max2019)\
**Replies:** 178\
**Last updated:** [25 June 2024 20:00 UTC](https://discourse.agopengps.com/t/toughpad-book/399 "2024-06-25T20:00:32Z")

</div>

As the computer/screen combo is probably one of the most expensive items in the AOG system I would like to ask peoples advice on what spec works. Maybe the best way to approach this is to deal with minimums. Some of this…

---

## [Toughpad fzg1 - how to set A1,A2 buttons](https://discourse.agopengps.com/t/toughpad-fzg1-how-to-set-a1-a2-buttons/9647)

<div class="topic-metadata">

**Author:** [@Dfarms11](https://discourse.agopengps.com/u/Dfarms11)\
**Replies:** 4\
**Last updated:** [12 May 2024 12:38 UTC](https://discourse.agopengps.com/t/toughpad-fzg1-how-to-set-a1-a2-buttons/9647 "2024-05-12T12:38:55Z")

</div>

Does anyone know how to set the A1 and A2 buttons? I’ve seen a video on it but it must be on a different operating system as mine doesn’t have the same options to change/ set them. I’m using windows 10 pro.

---

## [Getac cellular reception](https://discourse.agopengps.com/t/getac-cellular-reception/12674)

<div class="topic-metadata">

**Author:** [@clark](https://discourse.agopengps.com/u/clark)\
**Replies:** 16\
**Last updated:** [5 May 2024 16:44 UTC](https://discourse.agopengps.com/t/getac-cellular-reception/12674 "2024-05-05T16:44:01Z")

</div>

I have a getac tablet, and I popped a SIM card in to see how it would work. I was a little disappointed with the results. Where I am at, we have, in most places, good to excellent cell reception, yet the getac seemed to …

---

## [Microsoft surface 3](https://discourse.agopengps.com/t/microsoft-surface-3/12570)

<div class="topic-metadata">

**Author:** [@Redfarmer](https://discourse.agopengps.com/u/Redfarmer)\
**Replies:** 9\
**Last updated:** [14 April 2024 12:07 UTC](https://discourse.agopengps.com/t/microsoft-surface-3/12570 "2024-04-14T12:07:27Z")

</div>

Id like a little input from you guys that are running surface tablets. How are you connecting your board, did you get a docking station of sorts? Or can i just use a usb to ethernet dongle? Trying to decide wether i shou…

---

## [FZ-G1 ethernet controller not working](https://discourse.agopengps.com/t/fz-g1-ethernet-controller-not-working/14451)

<div class="topic-metadata">

**Author:** [@Bwuk](https://discourse.agopengps.com/u/Bwuk)\
**Replies:** 16\
**Last updated:** [7 April 2024 15:06 UTC](https://discourse.agopengps.com/t/fz-g1-ethernet-controller-not-working/14451 "2024-04-07T15:06:37Z")

</div>

Hello I thought to ask about help here is anyone has encountered same problem with Panasonic FZ-G1. I recently upgraded my 3G mobile card to 4G version. After switching it everything worked fine for a while and I even …

---

## [Fully enclosed windows PC](https://discourse.agopengps.com/t/fully-enclosed-windows-pc/15783)

<div class="topic-metadata">

**Author:** [@Damnbuffalo](https://discourse.agopengps.com/u/Damnbuffalo)\
**Replies:** 4\
**Last updated:** [31 March 2024 01:57 UTC](https://discourse.agopengps.com/t/fully-enclosed-windows-pc/15783 "2024-03-31T01:57:36Z")

</div>

Saw this on Ali Express and was wondering what anyone thought of it as a potential rugged tablet option? New Embedded All In One Industrial Computer Panel PC With 10 Points Capacitive Touch Screen Monitor IP65 Screen p…

---

## [No commands going to hydraulic valve](https://discourse.agopengps.com/t/no-commands-going-to-hydraulic-valve/16002)

<div class="topic-metadata">

**Author:** [@IHTractor](https://discourse.agopengps.com/u/IHTractor)\
**Replies:** 11\
**Last updated:** [28 March 2024 21:18 UTC](https://discourse.agopengps.com/t/no-commands-going-to-hydraulic-valve/16002 "2024-03-28T21:18:37Z")

</div>

Hi all, My System: IH 826 tractor Baraki open center Hydraulic valve standard V4.2 all in one board FZ-G1 tablet mostly working with V5.8.1 software, although i tried V6.0.10 also with no change My Problem: In a …

---

## [CF-D1 hard drive](https://discourse.agopengps.com/t/cf-d1-hard-drive/15288)

<div class="topic-metadata">

**Author:** [@ornes](https://discourse.agopengps.com/u/ornes)\
**Replies:** 2\
**Last updated:** [29 January 2024 19:27 UTC](https://discourse.agopengps.com/t/cf-d1-hard-drive/15288 "2024-01-29T19:27:38Z")

</div>

I got hold of a cheap Panasonic CF-D1, but when it arrived it lacked a hard drive. Anyone know if I can just use a normal SSD drive in this? I work at a school where they probably have used ones that nobody need around.

---

## [Panasonic FZ-G1 Cab Charger](https://discourse.agopengps.com/t/panasonic-fz-g1-cab-charger/15096)

<div class="topic-metadata">

**Author:** [@lb2419](https://discourse.agopengps.com/u/lb2419)\
**Replies:** 5\
**Last updated:** [10 January 2024 19:03 UTC](https://discourse.agopengps.com/t/panasonic-fz-g1-cab-charger/15096 "2024-01-10T19:03:38Z")

</div>

Hello, Just trying to see what other people are doing to charge their tablets in the cab? The back says it needs 16v 4.06A? There is 12V to 16V charger on amazon but they seem really expensive for what they do

---

## [FZ-G1 Charge setups?](https://discourse.agopengps.com/t/fz-g1-charge-setups/14882)

<div class="topic-metadata">

**Author:** [@greenex94](https://discourse.agopengps.com/u/greenex94)\
**Replies:** 7\
**Last updated:** [23 December 2023 15:49 UTC](https://discourse.agopengps.com/t/fz-g1-charge-setups/14882 "2023-12-23T15:49:31Z")

</div>

Just got a FZ-G1 mounted. I was hoping to charge via USB, and I thought I found in the FZ-G1 specs that it was possible. However, no luck. I really hate the thought of having an inverter to charge the thing: DC to AC to…

---

## [FZG1 bricked. No lights, won't boot, no bios](https://discourse.agopengps.com/t/fzg1-bricked-no-lights-wont-boot-no-bios/13850)

<div class="topic-metadata">

**Author:** [@pj\_05](https://discourse.agopengps.com/u/pj_05)\
**Replies:** 8\
**Last updated:** [12 September 2023 20:01 UTC](https://discourse.agopengps.com/t/fzg1-bricked-no-lights-wont-boot-no-bios/13850 "2023-09-12T20:01:38Z")

</div>

Took the battery out to check the sin card size, put battery back in, nothing. Won’t start, plugged in or on battery. At this point I’m just gonna give up on this pile of crap and buy a new Surface Pro Any suggestions …

---

## [FZG1 Access Port Denied](https://discourse.agopengps.com/t/fzg1-access-port-denied/13838)

<div class="topic-metadata">

**Author:** [@pj\_05](https://discourse.agopengps.com/u/pj_05)\
**Replies:** 9\
**Last updated:** [23 August 2023 09:33 UTC](https://discourse.agopengps.com/t/fzg1-access-port-denied/13838 "2023-08-23T09:33:31Z")

</div>

Access to port denied on Steer module. I have followed all existing advice on this forum to fix this issue. There’s no particular correlation when this happens. I have replaced my Surface pro 3 (broken touch screen) w…

---

## [Camera/webcam](https://discourse.agopengps.com/t/camera-webcam/13844)

<div class="topic-metadata">

**Author:** [@davidroberts30](https://discourse.agopengps.com/u/davidroberts30)\
**Replies:** 0\
**Last updated:** [23 August 2023 07:48 UTC](https://discourse.agopengps.com/t/camera-webcam/13844 "2023-08-23T07:48:34Z")

</div>

any recomendations for a wired usb camera to run through agopen? would like low light capability and autofocus idea to mount it on a magnet so can move it about in drill hopper etc thanks

---

## [FZ-G1 Brightness](https://discourse.agopengps.com/t/fz-g1-brightness/13241)

<div class="topic-metadata">

**Author:** [@ikidd](https://discourse.agopengps.com/u/ikidd)\
**Replies:** 5\
**Last updated:** [3 August 2023 01:45 UTC](https://discourse.agopengps.com/t/fz-g1-brightness/13241 "2023-08-03T01:45:22Z")

</div>

I have 3 of these units. One cratered so I brought another one out of the cupboard but I can’t get the brightness control to work on it. I’m pretty sure the one that cratered had the same issue when I first tried to us…

---

## [Panasonic FZ-G1 windows 8.1](https://discourse.agopengps.com/t/panasonic-fz-g1-windows-8-1/13384)

<div class="topic-metadata">

**Author:** [@CC\_35](https://discourse.agopengps.com/u/CC_35)\
**Replies:** 14\
**Last updated:** [26 June 2023 18:50 UTC](https://discourse.agopengps.com/t/panasonic-fz-g1-windows-8-1/13384 "2023-06-26T18:50:41Z")

</div>

Hello, I bought a Panasonic FZ G1, I made all updates because never done since almost 3 years and I still can not launch AgOpen Gps. Which ways can I use to know where my problem is? Is there a log file anywhere? I didn…

[Next page](https://discourse.agopengps.com/c/hardware/tablet-computer/47.md?page=1)