# Bugs

**URL:** https://discourse.agopengps.com/c/software/bugs/58.md

[Latest](https://discourse.agopengps.com/latest.md) · [Categories](https://discourse.agopengps.com/categories.md) · [Tags](https://discourse.agopengps.com/tags.md)

---

## [Bugs/Issues v6.7.x](https://discourse.agopengps.com/t/bugs-issues-v6-7-x/19451)

<div class="topic-metadata">

**Author:** [@Richardklasens\_admin](https://discourse.agopengps.com/u/Richardklasens_admin)\
**Replies:** 10\
**Last updated:** [29 September 2025 13:49 UTC](https://discourse.agopengps.com/t/bugs-issues-v6-7-x/19451 "2025-09-29T13:49:19Z")

</div>

Post issues or bugs from 6.7.0 and up on the GitHub repository please in the Issues Section https://github.com/agopengps-official/agopengps/issues

---

## [All in One inverted mounting roll error](https://discourse.agopengps.com/t/all-in-one-inverted-mounting-roll-error/13911)

<div class="topic-metadata">

**Author:** [@sarge](https://discourse.agopengps.com/u/sarge)\
**Replies:** 4\
**Last updated:** [12 August 2025 12:34 UTC](https://discourse.agopengps.com/t/all-in-one-inverted-mounting-roll-error/13911 "2025-08-12T12:34:01Z")

</div>

I have mounted my all in One board up side down to the bottom of a lid in the cab. I have the roll offset to 180deg. The roll will read in the -5 to 5 deg range then randomly switch to -355 to 5 deg, this causes some ver…

---

## [Bugs 6.4.5 (post Here)](https://discourse.agopengps.com/t/bugs-6-4-5-post-here/18087)

<div class="topic-metadata">

**Author:** [@Richardklasens\_admin](https://discourse.agopengps.com/u/Richardklasens_admin)\
**Replies:** 21\
**Last updated:** [4 April 2025 14:13 UTC](https://discourse.agopengps.com/t/bugs-6-4-5-post-here/18087 "2025-04-04T14:13:46Z")

</div>

Please post issues and bugs here Release 6.4.0

---

## [AB Guidance line is incorrect](https://discourse.agopengps.com/t/ab-guidance-line-is-incorrect/16390)

<div class="topic-metadata">

**Author:** [@ltstew](https://discourse.agopengps.com/u/ltstew)\
**Replies:** 35\
**Last updated:** [13 March 2025 22:51 UTC](https://discourse.agopengps.com/t/ab-guidance-line-is-incorrect/16390 "2025-03-13T22:51:26Z")

</div>

I’m using v6.2agopen, All in One micro v4.4, RTKbase, and keya steering motor with usb machine sectional control on a 90’ self propelled sprayer. It steers great however spraying in a field my AB line only shifts 67’ ove…

---

## [Bug..maybe-Boundary Paths](https://discourse.agopengps.com/t/bug-maybe-boundary-paths/16667)

<div class="topic-metadata">

**Author:** [@Keegan4123](https://discourse.agopengps.com/u/Keegan4123)\
**Replies:** 1\
**Last updated:** [28 September 2024 04:30 UTC](https://discourse.agopengps.com/t/bug-maybe-boundary-paths/16667 "2024-09-28T04:30:23Z")

</div>

Using the most recent version when creating an outer boundary and an inner boundary, I can’t get separate paths in the line editor… it creates two, one for inner and one for outer, but they are the same. Can’t create mor…

---

## [GPS out problem](https://discourse.agopengps.com/t/gps-out-problem/16557)

<div class="topic-metadata">

**Author:** [@GVFarmer](https://discourse.agopengps.com/u/GVFarmer)\
**Replies:** 31\
**Last updated:** [4 September 2024 13:12 UTC](https://discourse.agopengps.com/t/gps-out-problem/16557 "2024-09-04T13:12:05Z")

</div>

I think there is a problem with GPS OUT. I am feeding NMEA into climate field view and my tractor icon always drives sideways. When I view the VTG message, the heading value is 0 when heading due west and my tractor icon…

---

## [Agio Freezing](https://discourse.agopengps.com/t/agio-freezing/9839)

<div class="topic-metadata">

**Author:** [@Kyogle](https://discourse.agopengps.com/u/Kyogle)\
**Replies:** 11\
**Last updated:** [31 July 2024 19:45 UTC](https://discourse.agopengps.com/t/agio-freezing/9839 "2024-07-31T19:45:48Z")

</div>

Hi I am having trouble with agio freezing every time when it starts. I’ve tried unplugging each usb to try and identify which port is causing the issue but no luck . It works fine when nothing is plugged into the USB por…

---

## [AGIO freezing v5.7.2](https://discourse.agopengps.com/t/agio-freezing-v5-7-2/13253)

<div class="topic-metadata">

**Author:** [@arnauest](https://discourse.agopengps.com/u/arnauest)\
**Replies:** 4\
**Last updated:** [31 July 2024 10:22 UTC](https://discourse.agopengps.com/t/agio-freezing-v5-7-2/13253 "2024-07-31T10:22:32Z")

</div>

Hi I’m pretty new to AgopenGPS but love to work with this. I have build a position module using ardusimpleRTK2B (not rusing RTK yet) . I’m running AGopenGPS v5.7.2 and built a section control. It starts working fine an…

---

## [Bug- u turn on headlands](https://discourse.agopengps.com/t/bug-u-turn-on-headlands/16670)

<div class="topic-metadata">

**Author:** [@Keegan4123](https://discourse.agopengps.com/u/Keegan4123)\
**Replies:** 2\
**Last updated:** [20 May 2024 13:35 UTC](https://discourse.agopengps.com/t/bug-u-turn-on-headlands/16670 "2024-05-20T13:35:56Z")

</div>

I seem to remember last year in V5 when reaching a headland that was close to parallel to the direction of travel the u turn would come in closer to the tractor and close the gap so the turn could be completed properly a…

---

## [Steer settings for tractor profile occasionally reverting back to original values](https://discourse.agopengps.com/t/steer-settings-for-tractor-profile-occasionally-reverting-back-to-original-values/16644)

<div class="topic-metadata">

**Author:** [@Arnold7](https://discourse.agopengps.com/u/Arnold7)\
**Replies:** 5\
**Last updated:** [18 May 2024 22:38 UTC](https://discourse.agopengps.com/t/steer-settings-for-tractor-profile-occasionally-reverting-back-to-original-values/16644 "2024-05-18T22:38:11Z")

</div>

I am having some issues on Version 6.3.0 where some of my tractors settings I input are not retained when shutting down the tablet and starting up AOG at a later date. For example, I set my ackermann value to 90 for a pa…

---

## [Photos not loading?](https://discourse.agopengps.com/t/photos-not-loading/15589)

<div class="topic-metadata">

**Author:** [@fonz2001](https://discourse.agopengps.com/u/fonz2001)\
**Replies:** 3\
**Last updated:** [26 February 2024 01:18 UTC](https://discourse.agopengps.com/t/photos-not-loading/15589 "2024-02-26T01:18:42Z")

</div>

Hello. I am new to this group and still navigating my way around. I am finding that the pictures aren’t loading when I go into a discussion/thread? I can see the blank space where the picture should be, but there is noth…

---

## [5.8.3 Roll error freeze when unpowered](https://discourse.agopengps.com/t/5-8-3-roll-error-freeze-when-unpowered/15222)

<div class="topic-metadata">

**Author:** [@Val](https://discourse.agopengps.com/u/Val)\
**Replies:** 2\
**Last updated:** [22 January 2024 14:05 UTC](https://discourse.agopengps.com/t/5-8-3-roll-error-freeze-when-unpowered/15222 "2024-01-22T14:05:39Z")

</div>

Hello, I’ve found a bug in UDP (which have probably ever been reported since it’s really annoying), with a kaupoi pcb (shouldn’t have importance here). When you unplug -plug UDP while working, everything is okay. If y…

---

## [Agopen dont load U-turn configuration right away](https://discourse.agopengps.com/t/agopen-dont-load-u-turn-configuration-right-away/14102)

<div class="topic-metadata">

**Author:** [@JensKnudsen](https://discourse.agopengps.com/u/JensKnudsen)\
**Replies:** 5\
**Last updated:** [3 October 2023 06:48 UTC](https://discourse.agopengps.com/t/agopen-dont-load-u-turn-configuration-right-away/14102 "2023-10-03T06:48:03Z")

</div>

When you load a saved vehicle with different settings for U-turn, Agopen dont load the settings for U-turn right away, you have to go to U-turn configuration and change a setting before it load the saved settings

---

## [Implement displaced when i connect the aruduino steering module](https://discourse.agopengps.com/t/implement-displaced-when-i-connect-the-aruduino-steering-module/13300)

<div class="topic-metadata">

**Author:** [@Rmuelledes](https://discourse.agopengps.com/u/Rmuelledes)\
**Replies:** 9\
**Last updated:** [27 June 2023 14:23 UTC](https://discourse.agopengps.com/t/implement-displaced-when-i-connect-the-aruduino-steering-module/13300 "2023-06-27T14:23:25Z")

</div>

Hello, when I connect the steering module in a Dell Venue 11 with Windows 81, the implement moves to one side. If I change my computer everything goes perfectly. I have already deleted and reinstalled Agopengps differen…

---

## [New Teensy 4.1, windows and arduino ide not recognizing it](https://discourse.agopengps.com/t/new-teensy-4-1-windows-and-arduino-ide-not-recognizing-it/12853)

<div class="topic-metadata">

**Author:** [@north](https://discourse.agopengps.com/u/north)\
**Replies:** 3\
**Last updated:** [7 May 2023 20:40 UTC](https://discourse.agopengps.com/t/new-teensy-4-1-windows-and-arduino-ide-not-recognizing-it/12853 "2023-05-07T20:40:26Z")

</div>

I’m trying to upload candus firmware to my new teensy but I don’t know what I’m doing wrong. I followed “Configuring the Teensy wiki”. Arduino ide is 1.8.19 and teensyduono is from wiki’s link and it is supposed to be 1.…

---

## [Machine.ino 9 section invert problem](https://discourse.agopengps.com/t/machine-ino-9-section-invert-problem/12443)

<div class="topic-metadata">

**Author:** [@Joni](https://discourse.agopengps.com/u/Joni)\
**Replies:** 0\
**Last updated:** [15 April 2023 19:05 UTC](https://discourse.agopengps.com/t/machine-ino-9-section-invert-problem/12443 "2023-04-15T19:05:27Z")

</div>

Hello, I had some difficulties to get my 9th section working correctly with “invert relay”. The 9th section was not inverted. I got it working now with some help by writing an “!” before “relaystate” in the ino only for…

---

## [Udp deconnexion after one hour](https://discourse.agopengps.com/t/udp-deconnexion-after-one-hour/11832)

<div class="topic-metadata">

**Author:** [@steph40](https://discourse.agopengps.com/u/steph40)\
**Replies:** 1\
**Last updated:** [4 March 2023 13:02 UTC](https://discourse.agopengps.com/t/udp-deconnexion-after-one-hour/11832 "2023-03-04T13:02:50Z")

</div>

hello i’m running in 5.7.2 with kaupoi pcb in udp enc28j60. All is good but after one hour, the udp disconnect I should restart the pcb to have the connection. But don’t know for how long time.

---

## [Can't connect to NTRIP 5.7.2](https://discourse.agopengps.com/t/cant-connect-to-ntrip-5-7-2/11764)

<div class="topic-metadata">

**Author:** [@Ray\_Jorgensen](https://discourse.agopengps.com/u/Ray_Jorgensen)\
**Replies:** 2\
**Last updated:** [28 February 2023 20:16 UTC](https://discourse.agopengps.com/t/cant-connect-to-ntrip-5-7-2/11764 "2023-02-28T20:16:24Z")

</div>

I enter the NTRIP info and get a invalid IP port message. I use the USA Iowa state RTK service and it requires a port of 10000. My guess is that this is the problem … If I use the default port, I can’t connect, but I do…

---

## [Errores V\_5.5.0](https://discourse.agopengps.com/t/errores-v-5-5-0/8507)

<div class="topic-metadata">

**Author:** [@CVX](https://discourse.agopengps.com/u/CVX)\
**Replies:** 10\
**Last updated:** [3 February 2023 21:21 UTC](https://discourse.agopengps.com/t/errores-v-5-5-0/8507 "2023-02-03T21:21:17Z")

</div>

Has anyone tried version 5.5.0? On the arduino screen I get this:

---

## [Tram Byte is not sent to Steer board](https://discourse.agopengps.com/t/tram-byte-is-not-sent-to-steer-board/11452)

<div class="topic-metadata">

**Author:** [@BabtaiRTK](https://discourse.agopengps.com/u/BabtaiRTK)\
**Replies:** 0\
**Last updated:** [2 February 2023 21:04 UTC](https://discourse.agopengps.com/t/tram-byte-is-not-sent-to-steer-board/11452 "2023-02-02T21:04:58Z")

</div>

Hello , i browsed PGN files and saw that there’s supposed to be a tram byte sent to autosteer board. But in reality nothing is sent , so whith every AOG version i need to modify source code to make it work , is…

---

## [The program cannot distinguish between day and night](https://discourse.agopengps.com/t/the-program-cannot-distinguish-between-day-and-night/10807)

<div class="topic-metadata">

**Author:** [@Bestgart](https://discourse.agopengps.com/u/Bestgart)\
**Replies:** 4\
**Last updated:** [9 December 2022 05:26 UTC](https://discourse.agopengps.com/t/the-program-cannot-distinguish-between-day-and-night/10807 "2022-12-09T05:26:37Z")

</div>

the program cannot distinguish between day and night. It works in day-night mode. how can i set. Even though I fixed it, it’s back to normal.

---

## [Error when Longitude or Latitude is Negative!](https://discourse.agopengps.com/t/error-when-longitude-or-latitude-is-negative/10584)

<div class="topic-metadata">

**Author:** [@87yj](https://discourse.agopengps.com/u/87yj)\
**Replies:** 2\
**Last updated:** [4 November 2022 10:58 UTC](https://discourse.agopengps.com/t/error-when-longitude-or-latitude-is-negative/10584 "2022-11-04T10:58:27Z")

</div>

I’m working with v 5.6.15 and getting Panda going over TCP and found a bug in conversion of Lat and Lon from the NMEA sentence to the dd.dddd format displaced on the screen. Also replicated the error in v5.5 In North …

---

## [25 deg slope bug](https://discourse.agopengps.com/t/25-deg-slope-bug/9101)

<div class="topic-metadata">

**Author:** [@\_Martin](https://discourse.agopengps.com/u/_Martin)\
**Replies:** 0\
**Last updated:** [21 April 2022 20:03 UTC](https://discourse.agopengps.com/t/25-deg-slope-bug/9101 "2022-04-21T20:03:16Z")

</div>

Hello everyone! I’m experiencing a bug in AOG when the slope just reach 25 deg on the side: the inclinometer (CMPS14 on my setup) start to read very strange value making the steering go all over the place (not really wh…

---

## [Bing maps doesn’t load properly](https://discourse.agopengps.com/t/bing-maps-doesn-t-load-properly/8985)

<div class="topic-metadata">

**Author:** [@roxa](https://discourse.agopengps.com/u/roxa)\
**Replies:** 1\
**Last updated:** [13 April 2022 10:11 UTC](https://discourse.agopengps.com/t/bing-maps-doesn-t-load-properly/8985 "2022-04-13T10:11:40Z")

</div>

Tried the new feature of adding boundaries using bing maps and in the first try it worked perfectly. One day later, it doesn’t load the tiles, when I try to create boundaries for another field. I have verified that the …

---

## [AgIO freezes when starting a field](https://discourse.agopengps.com/t/agio-freezes-when-starting-a-field/7511)

<div class="topic-metadata">

**Author:** [@Benjamin](https://discourse.agopengps.com/u/Benjamin)\
**Replies:** 10\
**Last updated:** [18 November 2021 08:04 UTC](https://discourse.agopengps.com/t/agio-freezes-when-starting-a-field/7511 "2021-11-18T08:04:15Z")

</div>

Hi everyone, i have a problem with AgIO. I flashed a modified version of the Autosteer\_USB\_v5\_0 on a Canbed FD board (which acts as a Arduino Leonardo). I modified it to control a Danfoss PVED-CC. When i only open AgIO…

---

## [Very Small bug in IMU\_USB\_v5\_0.ino with step down](https://discourse.agopengps.com/t/very-small-bug-in-imu-usb-v5-0-ino-with-step-down/7371)

<div class="topic-metadata">

**Author:** [@Daniel](https://discourse.agopengps.com/u/Daniel)\
**Replies:** 0\
**Last updated:** [12 October 2021 18:35 UTC](https://discourse.agopengps.com/t/very-small-bug-in-imu-usb-v5-0-ino-with-step-down/7371 "2021-10-12T18:35:12Z")

</div>

I made this kind of small box for my IMU with a step down and an HC-05. So I can place them wherever I want on my tractors. However, I encountered a problem. in this configuration the arduino seems to launch too qu…

---

## [V 5.2.2 Bugs - You find em, We fix em](https://discourse.agopengps.com/t/v-5-2-2-bugs-you-find-em-we-fix-em/5891)

<div class="topic-metadata">

**Author:** [@BrianTee\_Admin](https://discourse.agopengps.com/u/BrianTee_Admin)\
**Replies:** 38\
**Last updated:** [3 October 2021 06:48 UTC](https://discourse.agopengps.com/t/v-5-2-2-bugs-you-find-em-we-fix-em/5891 "2021-10-03T06:48:29Z")

</div>

Less and less problems for sure, but always little improvements for sure. Find something broken? Please post here. https://github.com/farmerbriantee/AgOpenGPS/releases/tag/5.2.2

---

## [AgOpenGPS v 5.2.1 Bugs](https://discourse.agopengps.com/t/agopengps-v-5-2-1-bugs/5756)

<div class="topic-metadata">

**Author:** [@BrianTee\_Admin](https://discourse.agopengps.com/u/BrianTee_Admin)\
**Replies:** 41\
**Last updated:** [27 August 2021 15:45 UTC](https://discourse.agopengps.com/t/agopengps-v-5-2-1-bugs/5756 "2021-08-27T15:45:53Z")

</div>

Should be getting pretty stable - but there is always something missed. Please post any bugs you find and we will stomp them out.

---

## [Bugs v4.3.10](https://discourse.agopengps.com/t/bugs-v4-3-10/2040)

<div class="topic-metadata">

**Author:** [@FiveFinnishFarmers](https://discourse.agopengps.com/u/FiveFinnishFarmers)\
**Replies:** 50\
**Last updated:** [4 May 2021 20:10 UTC](https://discourse.agopengps.com/t/bugs-v4-3-10/2040 "2021-05-04T20:10:46Z")

</div>

When steer chart is open and you exit from data sources menu, the exit program pop up comes under steer chart and user can not klick ok to contunue. This means you are jammed and can’t klick anyting in the program.

---

## [Bug in UDP communikation](https://discourse.agopengps.com/t/bug-in-udp-communikation/589)

<div class="topic-metadata">

**Author:** [@doppelgrau](https://discourse.agopengps.com/u/doppelgrau)\
**Replies:** 7\
**Last updated:** [28 March 2021 11:51 UTC](https://discourse.agopengps.com/t/bug-in-udp-communikation/589 "2021-03-28T11:51:10Z")

</div>

Problem: If you use a broadcast IP in the UDP settings, the Data is not send to the network, instead it goes to loopback. Solution: In FormGPS after line 880 enable broadcasts for both sockets: sendSocket.EnableBroadca…

[Next page](https://discourse.agopengps.com/c/software/bugs/58.md?page=1)
