# U-Center

**URL:** https://discourse.agopengps.com/c/software/u-center/50.md

[Latest](https://discourse.agopengps.com/latest.md) · [Categories](https://discourse.agopengps.com/categories.md) · [Tags](https://discourse.agopengps.com/tags.md)

---

## [About the U-Center category](https://discourse.agopengps.com/t/about-the-u-center-category/2756)

<div class="topic-metadata">

**Author:** [@Richardklasens\_admin](https://discourse.agopengps.com/u/Richardklasens_admin)\
**Replies:** 0

</div>

(Replace this first paragraph with a brief description of your new category. This guidance will appear in the category selection area, so try to keep it below 200 characters.) Use the following paragraphs for a longer d…

---

## [Ublox "New Firmware"](https://discourse.agopengps.com/t/ublox-new-firmware/20312)

<div class="topic-metadata">

**Author:** [@Fastrunner08](https://discourse.agopengps.com/u/Fastrunner08)\
**Replies:** 1\
**Last updated:** [31 January 2026 10:30 UTC](https://discourse.agopengps.com/t/ublox-new-firmware/20312 "2026-01-31T10:30:26Z")

</div>

I see that ublox has a 1.40 and a 1.51 firmware out now for the F9P, I haven’t dug into what changes/updates are in it, but before i got down a rabbit hole i was curious if anyone in the group has done that yet, and (or…

---

## [F9P as basestation works after survey-in but not in fixed mode](https://discourse.agopengps.com/t/f9p-as-basestation-works-after-survey-in-but-not-in-fixed-mode/19505)

<div class="topic-metadata">

**Author:** [@LookMaNoHands](https://discourse.agopengps.com/u/LookMaNoHands)\
**Replies:** 3\
**Last updated:** [26 May 2025 13:46 UTC](https://discourse.agopengps.com/t/f9p-as-basestation-works-after-survey-in-but-not-in-fixed-mode/19505 "2025-05-26T13:46:38Z")

</div>

Hi, Setting up an Aurdusimple F9P as a base station to send updates via xbee radios (straight 900Mhz radios, so no NTRIP or anything). It works if I set the Time Mode to Survey-In (after the survey completes of course)…

---

## [Base/Rover Configuration in U-Center](https://discourse.agopengps.com/t/base-rover-configuration-in-u-center/15452)

<div class="topic-metadata">

**Author:** [@joshuacrowder4](https://discourse.agopengps.com/u/joshuacrowder4)\
**Replies:** 26\
**Last updated:** [9 December 2024 21:00 UTC](https://discourse.agopengps.com/t/base-rover-configuration-in-u-center/15452 "2024-12-09T21:00:13Z")

</div>

Hello, I assembled an AOG system last winter and used it one season but wasn’t able to get RTK to work. I’m trying to use a SimpleRTK2B with a WiFi NTRIP Master as the base through RTK2GO. For the rover, I’m using a Sim…

---

## [Can a f9p base/rover pair be configured to use the NAD83 datum?](https://discourse.agopengps.com/t/can-a-f9p-base-rover-pair-be-configured-to-use-the-nad83-datum/17677)

<div class="topic-metadata">

**Author:** [@xlbean](https://discourse.agopengps.com/u/xlbean)\
**Replies:** 1\
**Last updated:** [11 October 2024 04:05 UTC](https://discourse.agopengps.com/t/can-a-f9p-base-rover-pair-be-configured-to-use-the-nad83-datum/17677 "2024-10-11T04:05:26Z")

</div>

I have a permanent base station as well as rovers based off the f9p chip that I would like to configure to use the NAD83 datum instead of the WGS84 datum so that my lines and field stay relatively consistent year after y…

---

## [Field boundary not rectangular](https://discourse.agopengps.com/t/field-boundary-not-rectangular/15373)

<div class="topic-metadata">

**Author:** [@apple\_grower](https://discourse.agopengps.com/u/apple_grower)\
**Replies:** 10\
**Last updated:** [7 February 2024 16:14 UTC](https://discourse.agopengps.com/t/field-boundary-not-rectangular/15373 "2024-02-07T16:14:25Z")

</div>

Hello, I started using AGOPENGPS using a win10 Notebook, connected an F9P via USB (connection is fine) and NTRIP. Signal is fine, no failure is shown. I recorded the boundary of a field. The field is rectangular, but t…

---

## [Ublox F9P - Firmware programming](https://discourse.agopengps.com/t/ublox-f9p-firmware-programming/13376)

<div class="topic-metadata">

**Author:** [@Tryez](https://discourse.agopengps.com/u/Tryez)\
**Replies:** 9\
**Last updated:** [25 June 2023 21:45 UTC](https://discourse.agopengps.com/t/ublox-f9p-firmware-programming/13376 "2023-06-25T21:45:54Z")

</div>

Hello, I am continuing to work on my project to build Panda with my micro F9P. I received my micro F9P and started to follow tutorial to configure it. It seems that I am blocked at the first step as I can’t send firmw…

---

## [Problem while configuring F9P](https://discourse.agopengps.com/t/problem-while-configuring-f9p/13267)

<div class="topic-metadata">

**Author:** [@EFlonk](https://discourse.agopengps.com/u/EFlonk)\
**Replies:** 36\
**Last updated:** [18 June 2023 16:39 UTC](https://discourse.agopengps.com/t/problem-while-configuring-f9p/13267 "2023-06-18T16:39:18Z")

</div>

Hello, i’m trying to get the firmware on the F9P but i run into a problem. I have connect the micro to the computer with USB. in U-center is says connected. however when i want to upload the firmware the “Go” button st…

---

## [Compare F9P config files?](https://discourse.agopengps.com/t/compare-f9p-config-files/5370)

<div class="topic-metadata">

**Author:** [@m\_elias](https://discourse.agopengps.com/u/m_elias)\
**Replies:** 2\
**Last updated:** [26 April 2023 13:12 UTC](https://discourse.agopengps.com/t/compare-f9p-config-files/5370 "2023-04-26T13:12:28Z")

</div>

Is it possible to compare two F9P config files and see only the differences in u-center?

---

## [U center issues](https://discourse.agopengps.com/t/u-center-issues/12282)

<div class="topic-metadata">

**Author:** [@B\_bimmer](https://discourse.agopengps.com/u/B_bimmer)\
**Replies:** 7\
**Last updated:** [6 April 2023 13:35 UTC](https://discourse.agopengps.com/t/u-center-issues/12282 "2023-04-06T13:35:32Z")

</div>

The message view does not match what is shown in all the tutorials I have found. I have updated the firmware and it appeared successfully. Then I added the configuration file, but then I cannot expand the ubx category. A…

---

## [Configuration carte Ublox f9p avec Ucenter 2](https://discourse.agopengps.com/t/configuration-carte-ublox-f9p-avec-ucenter-2/8274)

<div class="topic-metadata">

**Author:** [@KerVAL](https://discourse.agopengps.com/u/KerVAL)\
**Replies:** 17\
**Last updated:** [14 December 2022 19:24 UTC](https://discourse.agopengps.com/t/configuration-carte-ublox-f9p-avec-ucenter-2/8274 "2022-12-14T19:24:37Z")

</div>

Bonjour, après mainte recherche sur AGopen, j’ai décidé de me lancer dans le projet, pour commencer j’ai acheté une antenne amn-mb-00 avec la carte U-blox f9p chez ardusimple dans le but de faire une barre de guidage, po…

---

## [Firmware update to base problem](https://discourse.agopengps.com/t/firmware-update-to-base-problem/10340)

<div class="topic-metadata">

**Author:** [@rikko](https://discourse.agopengps.com/u/rikko)\
**Replies:** 3\
**Last updated:** [7 October 2022 11:26 UTC](https://discourse.agopengps.com/t/firmware-update-to-base-problem/10340 "2022-10-07T11:26:08Z")

</div>

Yesterday I updated my f9p base to the 1.13 firmware and reinstalled Andreas’ 1.13 base config. However it now just says pending in the caster table. Done this for more than 24 hours. Is there something I should have d…