# AgOpen pwm output and existing bang bang hydraulic valve

**URL:** <https://discourse.agopengps.com/t/agopen-pwm-output-and-existing-bang-bang-hydraulic-valve/560>\
**Category:** Hardware\
**Created:** [12 December 2019 02:29 UTC](https://discourse.agopengps.com/t/agopen-pwm-output-and-existing-bang-bang-hydraulic-valve/560 "2019-12-12T02:29:45Z")\
**Posts on this page:** 1\
**Showing post:** 7

<div class="post-metadata">

**Author:** ![wwfarm](https://discourse.agopengps.com/letter_avatar_proxy/v4/letter/w/bc79bd/32.png) [@wwfarm](https://discourse.agopengps.com/u/wwfarm)\
**Post date:** [13 December 2019 02:14 UTC](https://discourse.agopengps.com/t/agopen-pwm-output-and-existing-bang-bang-hydraulic-valve/560/7 "2019-12-13T02:14:48Z")

</div>

> [@puddles](#):
>
> 3.I have an old ezguide 500 steer motor screen blew up so I have it sitting here, is there any reason that this motor will not work as a drive motor for AOG instead of purchasing another one?

I use a trimble ezsteer motor. It works good plus you don’t have to have the 12-24v converter with it. But ezsteer motor did not work with trimble screen after, so must of fried something

---

_[View the full topic](https://discourse.agopengps.com/t/agopen-pwm-output-and-existing-bang-bang-hydraulic-valve/560)._