# AIO micro 4.1 female ampseal harness

**URL:** <https://discourse.agopengps.com/t/aio-micro-4-1-female-ampseal-harness/14016>\
**Category:** Uncategorized\
**Created:** [12 September 2023 13:57 UTC](https://discourse.agopengps.com/t/aio-micro-4-1-female-ampseal-harness/14016 "2023-09-12T13:57:52Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![rogerix](https://discourse.agopengps.com/letter_avatar_proxy/v4/letter/r/dbc845/32.png) [@rogerix](https://discourse.agopengps.com/u/rogerix)\
**Post date:** [12 September 2023 13:57 UTC](https://discourse.agopengps.com/t/aio-micro-4-1-female-ampseal-harness/14016/1 "2023-09-12T13:57:52Z")

</div>

Hi All! Finally populated my AIO microv4.1 without magic smoke! and now I wanted to create an ampseal female harness similar to the one Guy1000 offered for sale [post](https://discourse.agopengps.com/t/full-steering-kits/13668). Wanted to get more info from Guy1000 but the topic is closed! Search also for the term harness but nothing much came out from the search. In the image below, I am showing Guy1000’s image of the item he sold on the left side and the ampseal pinout on the right. The harness shows 6 separate male (I assume) connectors that comes out of the ampseal female plug. I can’t figure out how many wires are involved for each of the 6 connectors and how they correspond to the different female wires marked A thru E. I can figure out probably connector 6 is for the battery. Any assistance much appreciated. Thx

 ![harness](https://discourse.agopengps.com/uploads/default/original/3X/8/9/8924884fa18470f20373f5a1057aca7aa672a1e1.jpeg)

WAS: Any suggestion on how to wire the WAS (its unmarked supposedly land rover height sensor) to ampseal as illustrated below  
 ![was wiring](https://discourse.agopengps.com/uploads/default/original/3X/d/6/d6e90555a46fb4b0e4567ae158f02d7665748ac9.png)

Steer Switch: In a post using a different [board](https://discourse.agopengps.com/t/pcbv2-switch-wiring-issues/7766/22) it shows a steer switch. Its a 3 wire but I think the resulting discussion stated it should only be a 2 wire? Looking at the ampseal pinout, the relevant pins will have to be 5, 6, 7, and 8. So for aio v4.1 micro how do I go about wiring (which pinout goes to what and what kind of switch) from end to end steering related harness  
 ![steer switch](https://discourse.agopengps.com/uploads/default/original/3X/8/2/82e9fb1afe5210ecada37ce3391203e5e1a4fad4.jpeg)