# CanBus on '12 MF 7624 (autosteer ready)

**URL:** <https://discourse.agopengps.com/t/canbus-on-12-mf-7624-autosteer-ready/13370>\
**Category:** CanBus\
**Created:** [22 June 2023 23:09 UTC](https://discourse.agopengps.com/t/canbus-on-12-mf-7624-autosteer-ready/13370 "2023-06-22T23:09:31Z")\
**Posts on this page:** 1\
**Showing post:** 12

<div class="post-metadata">

**Author:** ![andyinv](https://discourse.agopengps.com/letter_avatar_proxy/v4/letter/a/ecccb3/32.png) [@andyinv](https://discourse.agopengps.com/u/andyinv)\
**Post date:** [24 June 2023 05:04 UTC](https://discourse.agopengps.com/t/canbus-on-12-mf-7624-autosteer-ready/13370/12 "2023-06-24T05:04:50Z")

</div>

Same happened to me. Bus speed is wrong, needs to be 250.

> [@Steering a '22 MF 6718S over CANBUS](https://discourse.agopengps.com/t/steering-a-22-mf-6718s-over-canbus/11955):
>
> So, finally getting time to write this one up. While look at a friend’s CVX240, I couldn’t help but admire the nice shiny new 6718S sitting next to it. Very tidy machine, jumped up in the cab, nice monitor… “aye, it’s steer ready”. Me: “oh, do you have RTK etc?”. Owner: “no, no unlocks for anything, it’s just ready”. Well… I had that AOG All-In-One board just sitting there, so time to go browse the [CANBUS](https://discourse.agopengps.com/c/hardware/canbus/33) pages and see what all it entailed. I’d already read Tony’s excellent [CANBUS for beginner…](https://discourse.agopengps.com/t/canbus-for-beginners-super-simple/3814)

---

_[View the full topic](https://discourse.agopengps.com/t/canbus-on-12-mf-7624-autosteer-ready/13370)._