# Case IH Puma 230, autosteer ready

**URL:** <https://discourse.agopengps.com/t/case-ih-puma-230-autosteer-ready/5592>\
**Category:** Success stories\
**Created:** [15 June 2021 17:16 UTC](https://discourse.agopengps.com/t/case-ih-puma-230-autosteer-ready/5592 "2021-06-15T17:16:45Z")\
**Posts on this page:** 1\
**Showing post:** 72

<div class="post-metadata">

**Author:** ![torriem](https://discourse.agopengps.com/letter_avatar_proxy/v4/letter/t/8dc957/32.png) [@torriem](https://discourse.agopengps.com/u/torriem)\
**Post date:** [30 October 2021 16:18 UTC](https://discourse.agopengps.com/t/case-ih-puma-230-autosteer-ready/5592/72 "2021-10-30T16:18:06Z")

</div>

So I noticed on the mouser page they had a link to a CAD step file for the 40 pin bulkhead receptacle. Here’s a prototype of a 3D printable version of the plug that might come in handy for some. I modified and simplified the step file mouser had provided, so it’s close to the right dimensions but I haven’t yet accounted for tolerances. The idea is to push the pins through the holes and epoxy them in place on the back side once everything is wired.

![40p_1](https://discourse.agopengps.com/uploads/default/original/2X/4/44533b147509b4caeb5372402d17db84a319b7bb.png)  
Above image still has all the holes but I decided to plug unused ones:  
 ![40p_2](https://discourse.agopengps.com/uploads/default/original/2X/2/22a6cfe5c0bd2d6781e2f38961727f4e5ad04ded.png)  
After I check the tolerances I’ll post the step and stl files here. Any way we could get the forum to allow stl and stp files to be posted?

---

_[View the full topic](https://discourse.agopengps.com/t/case-ih-puma-230-autosteer-ready/5592)._