# COM ports, AutoSteer configuration problems

**URL:** <https://discourse.agopengps.com/t/com-ports-autosteer-configuration-problems/5838>\
**Category:** Steering Mount files\
**Created:** [31 July 2021 11:49 UTC](https://discourse.agopengps.com/t/com-ports-autosteer-configuration-problems/5838 "2021-07-31T11:49:51Z")\
**Posts on this page:** 20\
**Page:** 2

<div class="post-metadata">

**Author:** ![PotatoFarmer](https://discourse.agopengps.com/user_avatar/discourse.agopengps.com/potatofarmer/32/11865_2.png) [@PotatoFarmer](https://discourse.agopengps.com/u/PotatoFarmer)\
**Post date:** [2 August 2021 14:12 UTC](https://discourse.agopengps.com/t/com-ports-autosteer-configuration-problems/5838/21 "2021-08-02T14:12:54Z")

</div>

I take it both gps and auto steer are plugged directly into your laptop.

What type of gps are you using? for example I use emlid m2, if I do not use the higher amperage usb 3.0 port and a heavy usb cable for it it has power issues.

Are the leds on your gps staying stable when you plug in the autosteer?

---

<div class="post-metadata">

**Author:** ![bricbric](https://discourse.agopengps.com/user_avatar/discourse.agopengps.com/bricbric/32/9918_2.png) [@bricbric](https://discourse.agopengps.com/u/bricbric)\
**Post date:** [2 August 2021 19:22 UTC](https://discourse.agopengps.com/t/com-ports-autosteer-configuration-problems/5838/22 "2021-08-02T19:22:43Z")

</div>

sorry make a copy sreen of AGIO and device manager,

voice and speech never replace a schematic or photos

---

<div class="post-metadata">

**Author:** ![CoNe](https://discourse.agopengps.com/letter_avatar_proxy/v4/letter/c/53a042/32.png) [@CoNe](https://discourse.agopengps.com/u/CoNe)\
**Post date:** [3 August 2021 08:52 UTC](https://discourse.agopengps.com/t/com-ports-autosteer-configuration-problems/5838/23 "2021-08-03T08:52:54Z")

</div>

![image](https://discourse.agopengps.com/images/transparent.png)  
 ![image](https://discourse.agopengps.com/images/transparent.png)

---

<div class="post-metadata">

**Author:** ![CoNe](https://discourse.agopengps.com/letter_avatar_proxy/v4/letter/c/53a042/32.png) [@CoNe](https://discourse.agopengps.com/u/CoNe)\
**Post date:** [3 August 2021 08:54 UTC](https://discourse.agopengps.com/t/com-ports-autosteer-configuration-problems/5838/24 "2021-08-03T08:54:14Z")

</div>

When I connect autosteer port, then GPS signal is lost, and when unplug, GPS signal is back. LEDs are ok. On Arduino, Tx is blinking, but Rx not.

---

<div class="post-metadata">

**Author:** ![Peter\_S](https://discourse.agopengps.com/letter_avatar_proxy/v4/letter/p/8edcca/32.png) [@Peter\_S](https://discourse.agopengps.com/u/Peter_S)\
**Post date:** [3 August 2021 09:38 UTC](https://discourse.agopengps.com/t/com-ports-autosteer-configuration-problems/5838/25 "2021-08-03T09:38:52Z")

</div>

You need the right config on your F9P

> [@Improved konfiguration files for f9p with firmware 1.13](https://discourse.agopengps.com/t/improved-konfiguration-files-for-f9p-with-firmware-1-13/2923):
>
> Here are 2 config files for f9p with my config worked out with ardusimple team. config for base station with msm4 messages at 1 hertz - usb output [baseortner.zip](https://discourse.agopengps.com/uploads/short-url/qIItZhfeZA8qt93Vvic7rXgy15c.zip) (3,8 KB) config for rover (agopengps version) [roverortner.zip](https://discourse.agopengps.com/uploads/short-url/5MaSw5wU0BRU69H3jsSOk1qN9aG.zip) (3,8 KB) 10 Hertz GPS-GLO-BEIDU-GALILEO SBAS DISABLED output to USB and GGA to uart2 gga+vtg at 10 hertz [Firmware download at ublox](https://www.u-blox.com/en/ubx-viewer/view/UBX_F9_100_HPG_113_ZED_F9P.7e6e899c5597acddf2f5f2f70fdf5fbe.bin?url=https%3A%2F%2Fwww.u-blox.com%2Fsites%2Fdefault%2Ffiles%2FUBX_F9_100_HPG_113_ZED_F9P.7e6e899c5597acddf2f5f2f70fdf5fbe.bin) [U-Center Software]([u-center](https://www.u-blox.com/en/product/u-center#tab-documentation-resources)

Be sure to save the config after uploadig.

After the upload, the F9P should send only GGA and VTG.

---

<div class="post-metadata">

**Author:** ![CoNe](https://discourse.agopengps.com/letter_avatar_proxy/v4/letter/c/53a042/32.png) [@CoNe](https://discourse.agopengps.com/u/CoNe)\
**Post date:** [3 August 2021 09:58 UTC](https://discourse.agopengps.com/t/com-ports-autosteer-configuration-problems/5838/26 "2021-08-03T09:58:06Z")

</div>

How to upload .txt files into F9P via U-blox?

---

<div class="post-metadata">

**Author:** ![bricbric](https://discourse.agopengps.com/user_avatar/discourse.agopengps.com/bricbric/32/9918_2.png) [@bricbric](https://discourse.agopengps.com/u/bricbric)\
**Post date:** [3 August 2021 10:09 UTC](https://discourse.agopengps.com/t/com-ports-autosteer-configuration-problems/5838/27 "2021-08-03T10:09:16Z")

</div>

thanks for picture

you are using V4 and you load V5.ino

so it is not good you need to put same software on arduino and AOG

as advise please use the V5.2.2…

---

<div class="post-metadata">

**Author:** ![CoNe](https://discourse.agopengps.com/letter_avatar_proxy/v4/letter/c/53a042/32.png) [@CoNe](https://discourse.agopengps.com/u/CoNe)\
**Post date:** [3 August 2021 10:11 UTC](https://discourse.agopengps.com/t/com-ports-autosteer-configuration-problems/5838/28 "2021-08-03T10:11:05Z")

</div>

First, thank you for your effort, I’ll update, because this is actually v4, you’re right.

---

<div class="post-metadata">

**Author:** ![Peter\_S](https://discourse.agopengps.com/letter_avatar_proxy/v4/letter/p/8edcca/32.png) [@Peter\_S](https://discourse.agopengps.com/u/Peter_S)\
**Post date:** [3 August 2021 11:20 UTC](https://discourse.agopengps.com/t/com-ports-autosteer-configuration-problems/5838/29 "2021-08-03T11:20:52Z")

</div>

![20210803_131845](https://discourse.agopengps.com/images/transparent.png)

I have no F9P here at the moment but you do it here.

---

<div class="post-metadata">

**Author:** ![CoNe](https://discourse.agopengps.com/letter_avatar_proxy/v4/letter/c/53a042/32.png) [@CoNe](https://discourse.agopengps.com/u/CoNe)\
**Post date:** [4 August 2021 12:50 UTC](https://discourse.agopengps.com/t/com-ports-autosteer-configuration-problems/5838/31 "2021-08-04T12:50:34Z")

</div>

![image](https://discourse.agopengps.com/images/transparent.png)

Have you uploaded this code ( program ) into Arduino nano? AutoSteer USB v5.0  
Min configuration

---

<div class="post-metadata">

**Author:** ![bricbric](https://discourse.agopengps.com/user_avatar/discourse.agopengps.com/bricbric/32/9918_2.png) [@bricbric](https://discourse.agopengps.com/u/bricbric)\
**Post date:** [4 August 2021 17:58 UTC](https://discourse.agopengps.com/t/com-ports-autosteer-configuration-problems/5838/32 "2021-08-04T17:58:09Z")

</div>

yes this the arduino program for NANO plug in USB and compatible with V5

---

<div class="post-metadata">

**Author:** ![CoNe](https://discourse.agopengps.com/letter_avatar_proxy/v4/letter/c/53a042/32.png) [@CoNe](https://discourse.agopengps.com/u/CoNe)\
**Post date:** [4 August 2021 18:17 UTC](https://discourse.agopengps.com/t/com-ports-autosteer-configuration-problems/5838/33 "2021-08-04T18:17:56Z")

</div>

It is for max configuration? I set min configuration, so that’s probably reason why it doesn’t work.

---

<div class="post-metadata">

**Author:** ![bricbric](https://discourse.agopengps.com/user_avatar/discourse.agopengps.com/bricbric/32/9918_2.png) [@bricbric](https://discourse.agopengps.com/u/bricbric)\
**Post date:** [4 August 2021 18:38 UTC](https://discourse.agopengps.com/t/com-ports-autosteer-configuration-problems/5838/34 "2021-08-04T18:38:23Z")

</div>

Sorry i dont understand there is no max and min it is unique config

you need to update this prog and AOG will configure after

so now that you load it start AOG V5 …

---

<div class="post-metadata">

**Author:** ![CoNe](https://discourse.agopengps.com/letter_avatar_proxy/v4/letter/c/53a042/32.png) [@CoNe](https://discourse.agopengps.com/u/CoNe)\
**Post date:** [4 August 2021 18:42 UTC](https://discourse.agopengps.com/t/com-ports-autosteer-configuration-problems/5838/35 "2021-08-04T18:42:24Z")

</div>

Min configuration means I don’t have accelerator, inclinometer and gyroscope etc. I have only WAS and other nessecary components.

---

<div class="post-metadata">

**Author:** ![bricbric](https://discourse.agopengps.com/user_avatar/discourse.agopengps.com/bricbric/32/9918_2.png) [@bricbric](https://discourse.agopengps.com/u/bricbric)\
**Post date:** [4 August 2021 18:48 UTC](https://discourse.agopengps.com/t/com-ports-autosteer-configuration-problems/5838/36 "2021-08-04T18:48:04Z")

</div>

no problem! 😉

on V5 all this are replaced by CMPS14 ou BNO080-85

if you dont have it one of them AOG ignore it  
lets go to start V5

and configure your com port

---

<div class="post-metadata">

**Author:** ![CoNe](https://discourse.agopengps.com/letter_avatar_proxy/v4/letter/c/53a042/32.png) [@CoNe](https://discourse.agopengps.com/u/CoNe)\
**Post date:** [4 August 2021 18:52 UTC](https://discourse.agopengps.com/t/com-ports-autosteer-configuration-problems/5838/37 "2021-08-04T18:52:09Z")

</div>

COM ports are ok now, it’s connected. The problem is that Rx led blinks slowly which means that Nano is receiving data, but Tx blinks very fast, different than Rx. On older version, there was written “not connected BN055x…”. Also, how to know that Nano sends data to motor?

---

<div class="post-metadata">

**Author:** ![bricbric](https://discourse.agopengps.com/user_avatar/discourse.agopengps.com/bricbric/32/9918_2.png) [@bricbric](https://discourse.agopengps.com/u/bricbric)\
**Post date:** [4 August 2021 18:55 UTC](https://discourse.agopengps.com/t/com-ports-autosteer-configuration-problems/5838/38 "2021-08-04T18:55:18Z")

</div>

could you make a copy screen of AGIO?

---

<div class="post-metadata">

**Author:** ![CoNe](https://discourse.agopengps.com/letter_avatar_proxy/v4/letter/c/53a042/32.png) [@CoNe](https://discourse.agopengps.com/u/CoNe)\
**Post date:** [4 August 2021 18:59 UTC](https://discourse.agopengps.com/t/com-ports-autosteer-configuration-problems/5838/39 "2021-08-04T18:59:03Z")

</div>

![image](https://discourse.agopengps.com/images/transparent.png)  
This happens on older version.  
 ![image](https://discourse.agopengps.com/images/transparent.png)  
Data in V5.

---

<div class="post-metadata">

**Author:** ![bricbric](https://discourse.agopengps.com/user_avatar/discourse.agopengps.com/bricbric/32/9918_2.png) [@bricbric](https://discourse.agopengps.com/u/bricbric)\
**Post date:** [4 August 2021 19:06 UTC](https://discourse.agopengps.com/t/com-ports-autosteer-configuration-problems/5838/40 "2021-08-04T19:06:22Z")

</div>

since now forget V4

and V5 seem working

now step by step  
For GPS what are the version?

For Autosteer board the Was seem not working did you apply 12v to the board ?

---

<div class="post-metadata">

**Author:** ![CoNe](https://discourse.agopengps.com/letter_avatar_proxy/v4/letter/c/53a042/32.png) [@CoNe](https://discourse.agopengps.com/u/CoNe)\
**Post date:** [4 August 2021 19:09 UTC](https://discourse.agopengps.com/t/com-ports-autosteer-configuration-problems/5838/41 "2021-08-04T19:09:50Z")

</div>

Applied 5V on Nano and WAS, and 12V on IBT2 motor driver. I don’t know what you mean for GPS version, but I think all is newest version. RTK board simplertk2b was configured to send only VTG and GGA messages, too.

[Previous page](https://discourse.agopengps.com/t/com-ports-autosteer-configuration-problems/5838.md?page=1)

[Next page](https://discourse.agopengps.com/t/com-ports-autosteer-configuration-problems/5838.md?page=3)
