# COM ports, AutoSteer configuration problems

**URL:** <https://discourse.agopengps.com/t/com-ports-autosteer-configuration-problems/5838>\
**Category:** Steering Mount files\
**Created:** [31 July 2021 11:49 UTC](https://discourse.agopengps.com/t/com-ports-autosteer-configuration-problems/5838 "2021-07-31T11:49:51Z")\
**Posts on this page:** 20\
**Page:** 3

<div class="post-metadata">

**Author:** ![bricbric](https://discourse.agopengps.com/user_avatar/discourse.agopengps.com/bricbric/32/9918_2.png) [@bricbric](https://discourse.agopengps.com/u/bricbric)\
**Post date:** [4 August 2021 19:17 UTC](https://discourse.agopengps.com/t/com-ports-autosteer-configuration-problems/5838/42 "2021-08-04T19:17:16Z")

</div>

for GPS i consider this config [Ublox F9P - Config for rover - #74 by m\_elias](https://discourse.agopengps.com/t/ublox-f9p-config-for-rover/308/74) (nneed also to update to 1.13 be carefull)

for autosteer board to understand more clearly coul you take a picture of your board …

in official V2 board the WAS receive 5V from 5V regulator and not nano …

---

<div class="post-metadata">

**Author:** ![CoNe](https://discourse.agopengps.com/letter_avatar_proxy/v4/letter/c/53a042/32.png) [@CoNe](https://discourse.agopengps.com/u/CoNe)\
**Post date:** [4 August 2021 19:22 UTC](https://discourse.agopengps.com/t/com-ports-autosteer-configuration-problems/5838/43 "2021-08-04T19:22:00Z")

</div>

AutoSteer board is not same as Arduino Nano? If not, does it include all ( nano, motor driver etc)?

![16281048706251494646022151828917](https://discourse.agopengps.com/images/transparent.png)

---

<div class="post-metadata">

**Author:** ![bricbric](https://discourse.agopengps.com/user_avatar/discourse.agopengps.com/bricbric/32/9918_2.png) [@bricbric](https://discourse.agopengps.com/u/bricbric)\
**Post date:** [4 August 2021 19:26 UTC](https://discourse.agopengps.com/t/com-ports-autosteer-configuration-problems/5838/44 "2021-08-04T19:26:20Z")

</div>

Thanks it is more clear

but you are missing ADS1115 I2C converter  
the was is connecting to this

---

<div class="post-metadata">

**Author:** ![CoNe](https://discourse.agopengps.com/letter_avatar_proxy/v4/letter/c/53a042/32.png) [@CoNe](https://discourse.agopengps.com/u/CoNe)\
**Post date:** [4 August 2021 19:29 UTC](https://discourse.agopengps.com/t/com-ports-autosteer-configuration-problems/5838/45 "2021-08-04T19:29:16Z")

</div>

Ok, I was reffering to this schematics : [http://www.gh-ortner.com/agopengps/lib/exe/detail.php?id=start&media=autosteer\_switch\_minimum\_config.jpg](http://www.gh-ortner.com/agopengps/lib/exe/detail.php?id=start&media=autosteer_switch_minimum_config.jpg)

I thought it’s enough, as it is called minimum configuration.

---

<div class="post-metadata">

**Author:** ![bricbric](https://discourse.agopengps.com/user_avatar/discourse.agopengps.com/bricbric/32/9918_2.png) [@bricbric](https://discourse.agopengps.com/u/bricbric)\
**Post date:** [4 August 2021 19:32 UTC](https://discourse.agopengps.com/t/com-ports-autosteer-configuration-problems/5838/46 "2021-08-04T19:32:41Z")

</div>

agree but since V4 AD1115 is necessary

this file is too old 2019/01/06 23:45

sorry you need to purcharse this I2C component to go forward

---

<div class="post-metadata">

**Author:** ![CoNe](https://discourse.agopengps.com/letter_avatar_proxy/v4/letter/c/53a042/32.png) [@CoNe](https://discourse.agopengps.com/u/CoNe)\
**Post date:** [4 August 2021 19:34 UTC](https://discourse.agopengps.com/t/com-ports-autosteer-configuration-problems/5838/47 "2021-08-04T19:34:11Z")

</div>

I have that convertor, but first of all Thank you for your effort to help me! I’ll mount it tomorrow and tell here, so you can see when you check messages. Greetings 🙂

---

<div class="post-metadata">

**Author:** ![bricbric](https://discourse.agopengps.com/user_avatar/discourse.agopengps.com/bricbric/32/9918_2.png) [@bricbric](https://discourse.agopengps.com/u/bricbric)\
**Post date:** [4 August 2021 19:35 UTC](https://discourse.agopengps.com/t/com-ports-autosteer-configuration-problems/5838/48 "2021-08-04T19:35:49Z")

</div>

your welcome!  
farmer helping Farmer !!

---

<div class="post-metadata">

**Author:** ![CoNe](https://discourse.agopengps.com/letter_avatar_proxy/v4/letter/c/53a042/32.png) [@CoNe](https://discourse.agopengps.com/u/CoNe)\
**Post date:** [5 August 2021 11:54 UTC](https://discourse.agopengps.com/t/com-ports-autosteer-configuration-problems/5838/49 "2021-08-05T11:54:42Z")

</div>

I’ve completed autosteer system, and it’s still not working (same as it was before). I checked Arduino nano pins ( D5 - PWM, D6 - DIR) with oscyloscope and there is no any signal. When I move WAS, program recognizes it. Autosteer and work switches are directly connected to GND, steer enable was set to None in AOG. Here’s some autosteer settings  
 ![image](https://discourse.agopengps.com/images/transparent.png)

---

<div class="post-metadata">

**Author:** ![bricbric](https://discourse.agopengps.com/user_avatar/discourse.agopengps.com/bricbric/32/9918_2.png) [@bricbric](https://discourse.agopengps.com/u/bricbric)\
**Post date:** [5 August 2021 12:51 UTC](https://discourse.agopengps.com/t/com-ports-autosteer-configuration-problems/5838/50 "2021-08-05T12:51:07Z")

</div>

did you apply the configuration AOG to nano by send ans save ?

![image](https://discourse.agopengps.com/images/transparent.png)  
after go to steer setting to play

![image](https://discourse.agopengps.com/images/transparent.png)

---

<div class="post-metadata">

**Author:** ![bricbric](https://discourse.agopengps.com/user_avatar/discourse.agopengps.com/bricbric/32/9918_2.png) [@bricbric](https://discourse.agopengps.com/u/bricbric)\
**Post date:** [5 August 2021 12:56 UTC](https://discourse.agopengps.com/t/com-ports-autosteer-configuration-problems/5838/51 "2021-08-05T12:56:16Z")

</div>

to do a simulation try to calibrate artificially and normmaly with steer switch to the ground the electric motor need to work according Was potentiometer position

check the topic of Brian here

> [@Steer settings Tutorial](https://discourse.agopengps.com/t/steer-settings-tutorial/5778):
>
> A tutorial on many of the basic steer settings. [[- YouTube] ](https://www.youtube.com/watch?v=haSfTC1h6k0)

or this video ( sorry in french ) about config of autosteer

[![](https://discourse.agopengps.com/uploads/default/original/2X/9/9bb10497e331eb862f5a8b4b2bfc847d4e5d27a3.jpeg "AgOpenGPS (tuto) V5 (V6) | Exemple des étapes initiales de réglages de la V5 | WAS & Motor") ](https://www.youtube.com/watch?v=Ymc0oR8rPIQ)

---

<div class="post-metadata">

**Author:** ![CoNe](https://discourse.agopengps.com/letter_avatar_proxy/v4/letter/c/53a042/32.png) [@CoNe](https://discourse.agopengps.com/u/CoNe)\
**Post date:** [5 August 2021 12:57 UTC](https://discourse.agopengps.com/t/com-ports-autosteer-configuration-problems/5838/52 "2021-08-05T12:57:58Z")

</div>

Ok, I’ll check this topic and video.

---

<div class="post-metadata">

**Author:** ![CoNe](https://discourse.agopengps.com/letter_avatar_proxy/v4/letter/c/53a042/32.png) [@CoNe](https://discourse.agopengps.com/u/CoNe)\
**Post date:** [5 August 2021 14:01 UTC](https://discourse.agopengps.com/t/com-ports-autosteer-configuration-problems/5838/53 "2021-08-05T14:01:19Z")

</div>

WAS and I2C communication works, and I guess I got it. But communication of Nano with motor driver is suspicious as motor simply doesn’t work. WAS data changes as I set potentiometer in different position. Also, in video you sent, I could set steer properties if motor works, but it doesn’t. Nano is receiving data but suspect that doesn’t send (Tx blinking rapidly, same when it’s not connected).

---

<div class="post-metadata">

**Author:** ![bricbric](https://discourse.agopengps.com/user_avatar/discourse.agopengps.com/bricbric/32/9918_2.png) [@bricbric](https://discourse.agopengps.com/u/bricbric)\
**Post date:** [5 August 2021 19:08 UTC](https://discourse.agopengps.com/t/com-ports-autosteer-configuration-problems/5838/54 "2021-08-05T19:08:04Z")

</div>

if WAS data change in AGO it seems NANO working

to be sure did you send data fron AOG to nano by the screen 😉 ![image](https://discourse.agopengps.com/images/transparent.png)

try to change all data in steer configuration to be sure nano receeive some info

```
in drive mode check PWM value on screen 

```

![image](https://discourse.agopengps.com/images/transparent.png)

---

<div class="post-metadata">

**Author:** ![CoNe](https://discourse.agopengps.com/letter_avatar_proxy/v4/letter/c/53a042/32.png) [@CoNe](https://discourse.agopengps.com/u/CoNe)\
**Post date:** [6 August 2021 10:17 UTC](https://discourse.agopengps.com/t/com-ports-autosteer-configuration-problems/5838/55 "2021-08-06T10:17:06Z")

</div>

PWM is 120 and on some moments it is 0 and again 120.

---

<div class="post-metadata">

**Author:** ![bricbric](https://discourse.agopengps.com/user_avatar/discourse.agopengps.com/bricbric/32/9918_2.png) [@bricbric](https://discourse.agopengps.com/u/bricbric)\
**Post date:** [6 August 2021 10:46 UTC](https://discourse.agopengps.com/t/com-ports-autosteer-configuration-problems/5838/56 "2021-08-06T10:46:59Z")

</div>

and when you play with potentiometer ? ( be sure you are in drive mode tractor icon need to be green )

---

<div class="post-metadata">

**Author:** ![CoNe](https://discourse.agopengps.com/letter_avatar_proxy/v4/letter/c/53a042/32.png) [@CoNe](https://discourse.agopengps.com/u/CoNe)\
**Post date:** [6 August 2021 10:53 UTC](https://discourse.agopengps.com/t/com-ports-autosteer-configuration-problems/5838/57 "2021-08-06T10:53:39Z")

</div>

Then PWM goes to 35 or 39 or 57 in some moments, but usually stays 120.

---

<div class="post-metadata">

**Author:** ![bricbric](https://discourse.agopengps.com/user_avatar/discourse.agopengps.com/bricbric/32/9918_2.png) [@bricbric](https://discourse.agopengps.com/u/bricbric)\
**Post date:** [6 August 2021 10:58 UTC](https://discourse.agopengps.com/t/com-ports-autosteer-configuration-problems/5838/58 "2021-08-06T10:58:19Z")

</div>

in drive mode ?

the motor never turn?

put a LED/resitor to one output of nano to see if it is blinkink

---

<div class="post-metadata">

**Author:** ![CoNe](https://discourse.agopengps.com/letter_avatar_proxy/v4/letter/c/53a042/32.png) [@CoNe](https://discourse.agopengps.com/u/CoNe)\
**Post date:** [6 August 2021 11:01 UTC](https://discourse.agopengps.com/t/com-ports-autosteer-configuration-problems/5838/59 "2021-08-06T11:01:16Z")

</div>

Yes, drive mode is on, and also autosteer is on.  
Motor doesn’t turn.  
I set LED to motor driver so it should blink when AOG sends instructions to motor, but it doesn’t blink, I could send photo where LED is.

---

<div class="post-metadata">

**Author:** ![CoNe](https://discourse.agopengps.com/letter_avatar_proxy/v4/letter/c/53a042/32.png) [@CoNe](https://discourse.agopengps.com/u/CoNe)\
**Post date:** [6 August 2021 11:05 UTC](https://discourse.agopengps.com/t/com-ports-autosteer-configuration-problems/5838/60 "2021-08-06T11:05:36Z")

</div>

![IMG_20210806_130206](https://discourse.agopengps.com/images/transparent.png)

---

<div class="post-metadata">

**Author:** ![bricbric](https://discourse.agopengps.com/user_avatar/discourse.agopengps.com/bricbric/32/9918_2.png) [@bricbric](https://discourse.agopengps.com/u/bricbric)\
**Post date:** [6 August 2021 11:49 UTC](https://discourse.agopengps.com/t/com-ports-autosteer-configuration-problems/5838/61 "2021-08-06T11:49:05Z")

</div>

sorry blinking in PWM is complex for human to sse

but if it is lighting it seems you get the signal

[Previous page](https://discourse.agopengps.com/t/com-ports-autosteer-configuration-problems/5838.md?page=2)

[Next page](https://discourse.agopengps.com/t/com-ports-autosteer-configuration-problems/5838.md?page=4)
