# Danfoss valve, pressure sensor location

**URL:** <https://discourse.agopengps.com/t/danfoss-valve-pressure-sensor-location/19337>\
**Category:** Hydraulic Systems\
**Created:** [1 May 2025 17:33 UTC](https://discourse.agopengps.com/t/danfoss-valve-pressure-sensor-location/19337 "2025-05-01T17:33:47Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![bennieschmith](https://discourse.agopengps.com/letter_avatar_proxy/v4/letter/b/db5fbb/32.png) [@bennieschmith](https://discourse.agopengps.com/u/bennieschmith)\
**Post date:** [1 May 2025 17:33 UTC](https://discourse.agopengps.com/t/danfoss-valve-pressure-sensor-location/19337/1 "2025-05-01T17:33:47Z")

</div>

Hey so I’m installing a danfoss valve on a Case STX440, where would be the best location to add the pressure sensor to detect manual intervention? And also what type of output signal does the sensor have to have?

---

<div class="post-metadata">

**Author:** ![Pat](https://discourse.agopengps.com/letter_avatar_proxy/v4/letter/p/8491ac/32.png) [@Pat](https://discourse.agopengps.com/u/Pat)\
**Post date:** [2 May 2025 01:07 UTC](https://discourse.agopengps.com/t/danfoss-valve-pressure-sensor-location/19337/2 "2025-05-02T01:07:49Z")

</div>

The sensor should be on the orbitrol LS line.

For the AiO board it must either output a 0-5v or 4-20ma signal. You select it with a jumper on the board.