# Dual GPS setups

**URL:** <https://discourse.agopengps.com/t/dual-gps-setups/1067>\
**Category:** RTK Base Setup\
**Created:** [13 February 2020 15:42 UTC](https://discourse.agopengps.com/t/dual-gps-setups/1067 "2020-02-13T15:42:52Z")\
**Posts on this page:** 1\
**Showing post:** 70

<div class="post-metadata">

**Author:** ![pauluzs](https://discourse.agopengps.com/letter_avatar_proxy/v4/letter/p/5daacb/32.png) [@pauluzs](https://discourse.agopengps.com/u/pauluzs)\
**Post date:** [15 May 2020 22:43 UTC](https://discourse.agopengps.com/t/dual-gps-setups/1067/70 "2020-05-15T22:43:39Z")

</div>

For who doesn’t want to solder to Board. Use the Pixhawk connectors

- 1: 5V\_IN
- 2: ZED-F9P UART1 RX (3.3V level)
- 3: ZED-F9P UART1 TX (3.3V level)
- 4,5: Not connected
- 6: GND

And crosslink ZED-F9P UART2 on the Xbee Header (RX\>TX TX\>RX)

![IMG_20200516_002814](https://discourse.agopengps.com/images/transparent.png)

---

_[View the full topic](https://discourse.agopengps.com/t/dual-gps-setups/1067)._
