# Hardware tutorial

**URL:** <https://discourse.agopengps.com/t/hardware-tutorial/11129>\
**Category:** Hardware\
**Created:** [6 January 2023 18:08 UTC](https://discourse.agopengps.com/t/hardware-tutorial/11129 "2023-01-06T18:08:59Z")\
**Posts on this page:** 8\
**Page:** 1

<div class="post-metadata">

**Author:** ![bibiruta](https://discourse.agopengps.com/letter_avatar_proxy/v4/letter/b/7bcc69/32.png) [@bibiruta](https://discourse.agopengps.com/u/bibiruta)\
**Post date:** [6 January 2023 18:09 UTC](https://discourse.agopengps.com/t/hardware-tutorial/11129/1 "2023-01-06T18:09:00Z")

</div>

Hello, I searched everywhere for a concrete hardware list but I couldn’t find one. Basicaly I want to know every piece of equipment I need to run AgOpenGPS and if they need to be combatible with arduino or other boards. Can you help me?

---

<div class="post-metadata">

**Author:** ![Kyfarmer](https://discourse.agopengps.com/letter_avatar_proxy/v4/letter/k/ba9def/32.png) [@Kyfarmer](https://discourse.agopengps.com/u/Kyfarmer)\
**Post date:** [6 January 2023 23:52 UTC](https://discourse.agopengps.com/t/hardware-tutorial/11129/2 "2023-01-06T23:52:29Z")

</div>

I second this idea, and hope someone can take time to do it.

---

<div class="post-metadata">

**Author:** ![NorthernFarmer](https://discourse.agopengps.com/letter_avatar_proxy/v4/letter/n/c0e974/32.png) [@NorthernFarmer](https://discourse.agopengps.com/u/NorthernFarmer)\
**Post date:** [7 January 2023 08:51 UTC](https://discourse.agopengps.com/t/hardware-tutorial/11129/3 "2023-01-07T08:51:45Z")

</div>

It is relatively easy to list every necessary piece for a working solution but it is pretty much impossible to list all possible combinations. The flexibility of AOG has almost become a burden, specifically for newcomers.

Perhaps no easy to agree on a single combination of HW for beginners. I’d say an old approach, Ardusimple SimpleRT2B, PCBV2, cytron, cmps14/BNOxx, Phidgets motor…

Anyone who prefers to purchase a cheap Opel Corsa and the steer motor there, can dig out instructions from existing threads and messages spread throughout the forum. Even support for hydraulic steering may be omitted from the very basic and well documented starter guide?

One might consider that this is already covered with the existing documentation?

---

<div class="post-metadata">

**Author:** ![bibiruta](https://discourse.agopengps.com/letter_avatar_proxy/v4/letter/b/7bcc69/32.png) [@bibiruta](https://discourse.agopengps.com/u/bibiruta)\
**Post date:** [7 January 2023 09:12 UTC](https://discourse.agopengps.com/t/hardware-tutorial/11129/4 "2023-01-07T09:12:11Z")

</div>

Thank you.

---

<div class="post-metadata">

**Author:** ![NorthernFarmer](https://discourse.agopengps.com/letter_avatar_proxy/v4/letter/n/c0e974/32.png) [@NorthernFarmer](https://discourse.agopengps.com/u/NorthernFarmer)\
**Post date:** [7 January 2023 16:13 UTC](https://discourse.agopengps.com/t/hardware-tutorial/11129/5 "2023-01-07T16:13:42Z")

</div>

Was just reading another forum, not sure if Andy has posted the same here:

> **[AgOpenGPS RTK Autosteer, How to Guide for £1000](https://thefarmingforum.co.uk/index.php?threads%2Fagopengps-rtk-autosteer-how-to-guide-for-%C2%A31000.382244%2F#post-8527866)**
>
> Introduction
> 
> AgOpenGPS (AOG) is Open source GPS guidance software that can be used as a basic lightbar, right through to RTK Autosteer with section control. All systems need a Windows 10 tablet/laptop and GNSS/RTK receiver and antennae to be...

---

<div class="post-metadata">

**Author:** ![Kyfarmer](https://discourse.agopengps.com/letter_avatar_proxy/v4/letter/k/ba9def/32.png) [@Kyfarmer](https://discourse.agopengps.com/u/Kyfarmer)\
**Post date:** [7 January 2023 23:54 UTC](https://discourse.agopengps.com/t/hardware-tutorial/11129/6 "2023-01-07T23:54:16Z")

</div>

Thank you

---

<div class="post-metadata">

**Author:** ![Kyfarmer](https://discourse.agopengps.com/letter_avatar_proxy/v4/letter/k/ba9def/32.png) [@Kyfarmer](https://discourse.agopengps.com/u/Kyfarmer)\
**Post date:** [8 January 2023 00:52 UTC](https://discourse.agopengps.com/t/hardware-tutorial/11129/7 "2023-01-08T00:52:44Z")

</div>

This gentelman who posted this in the farming forum makes mention of being able to buy a pcb with all the components on it. Is there a source in the US or north americaa that sells boards with everything installed ?

---

<div class="post-metadata">

**Author:** ![m\_elias](https://discourse.agopengps.com/letter_avatar_proxy/v4/letter/m/94ad74/32.png) [@m\_elias](https://discourse.agopengps.com/u/m_elias)\
**Post date:** [8 January 2023 02:13 UTC](https://discourse.agopengps.com/t/hardware-tutorial/11129/8 "2023-01-08T02:13:01Z")

</div>

I still have a couple of each AiO PCBs available, shipping from Canada. Send me a PM.

> [@All in One PCB](https://discourse.agopengps.com/t/all-in-one-pcb/10444/3):
>
> I have ordered 20 of each PCB with Ampseal 23 connector so anyone from Canada (and maybe USA) interested in only 1 or 2 let me know in a private message. I’m not sure yet what the price will be, depends on what you all need/want as there are some parts that’ll need hand soldering to complete the PCB. I’m also still working on figuring out a complete box/PCB/harness kit that might include a custom CNC end plate for a Hammond box. Once @Vili has the CAD drawings finished I want to ask a laser or w…

@Kyfarmer
