# John Deere 6930

**URL:** <https://discourse.agopengps.com/t/john-deere-6930/2545>\
**Category:** Success stories\
**Created:** [29 July 2020 20:29 UTC](https://discourse.agopengps.com/t/john-deere-6930/2545 "2020-07-29T20:29:53Z")\
**Posts on this page:** 1\
**Showing post:** 9

<div class="post-metadata">

**Author:** ![Seelsy](https://discourse.agopengps.com/letter_avatar_proxy/v4/letter/s/858c86/32.png) [@Seelsy](https://discourse.agopengps.com/u/Seelsy)\
**Post date:** [30 July 2020 06:21 UTC](https://discourse.agopengps.com/t/john-deere-6930/2545/9 "2020-07-30T06:21:37Z")

</div>

I tried setting the tool width in the middle but I still came across the problem. Possibly because of the offset and change of direction.

tool is 3.3m  
offset to the right,  
from centre of tractor to furthest point right 3.65m.

We have to make breaks in the unapplied area, then work them out from there. driving on the applied area as much as possible, with standing grass to the right. If that makes sense?

I believe @darrenjlobb had the same issues when he used the same tool setup. [Release v4.3.10 - Finally! - #39 by darrenjlobb](https://discourse.agopengps.com/t/release-v4-3-10-finally/1940/39)

Cut all our grass for hay this time… this morning its raining, brilliant!! But I will try the half width you suggested Brian, when i next have it on. But if I have to re-centre the line for a few days a year, its no big deal, the software works perfectly!

---

_[View the full topic](https://discourse.agopengps.com/t/john-deere-6930/2545)._
