# RC11-2 Rate control board 3D print enclosure

**URL:** <https://discourse.agopengps.com/t/rc11-2-rate-control-board-3d-print-enclosure/20841>\
**Category:** Uncategorized\
**Created:** [6 June 2026 19:20 UTC](https://discourse.agopengps.com/t/rc11-2-rate-control-board-3d-print-enclosure/20841 "2026-06-06T19:20:51Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![BrianP](https://discourse.agopengps.com/letter_avatar_proxy/v4/letter/b/94ad74/32.png) [@BrianP](https://discourse.agopengps.com/u/BrianP)\
**Post date:** [6 June 2026 19:20 UTC](https://discourse.agopengps.com/t/rc11-2-rate-control-board-3d-print-enclosure/20841/1 "2026-06-06T19:20:51Z")

</div>

Are there any 3D printable enclosures for the RC11-2 Rate control board?

---

<div class="post-metadata">

**Author:** ![SK21](https://discourse.agopengps.com/letter_avatar_proxy/v4/letter/s/d78d45/32.png) [@SK21](https://discourse.agopengps.com/u/SK21)\
**Post date:** [9 June 2026 16:47 UTC](https://discourse.agopengps.com/t/rc11-2-rate-control-board-3d-print-enclosure/20841/2 "2026-06-09T16:47:32Z")

</div>

[Enclosure.zip](https://discourse.agopengps.com/uploads/short-url/kuTrTjvNtNza3wE3gmpXMIuUdBt.zip) (152.5 KB)

---

<div class="post-metadata">

**Author:** ![BrianP](https://discourse.agopengps.com/letter_avatar_proxy/v4/letter/b/94ad74/32.png) [@BrianP](https://discourse.agopengps.com/u/BrianP)\
**Post date:** [9 June 2026 17:01 UTC](https://discourse.agopengps.com/t/rc11-2-rate-control-board-3d-print-enclosure/20841/3 "2026-06-09T17:01:25Z")

</div>

Brilliant thanks.
