# Remote IMU connection

**URL:** <https://discourse.agopengps.com/t/remote-imu-connection/17929>\
**Category:** Uncategorized\
**Created:** [19 November 2024 18:29 UTC](https://discourse.agopengps.com/t/remote-imu-connection/17929 "2024-11-19T18:29:37Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![BrianP](https://discourse.agopengps.com/letter_avatar_proxy/v4/letter/b/94ad74/32.png) [@BrianP](https://discourse.agopengps.com/u/BrianP)\
**Post date:** [19 November 2024 18:29 UTC](https://discourse.agopengps.com/t/remote-imu-connection/17929/1 "2024-11-19T18:29:37Z")

</div>

Looking to relocate the BNO085 of my AIO micro 4.1 board because of air suspension on the tractor cab.  
Which wires will need to be connected to run RVC?  
Thanks.

---

<div class="post-metadata">

**Author:** ![andyinv](https://discourse.agopengps.com/letter_avatar_proxy/v4/letter/a/ecccb3/32.png) [@andyinv](https://discourse.agopengps.com/u/andyinv)\
**Post date:** [21 November 2024 13:30 UTC](https://discourse.agopengps.com/t/remote-imu-connection/17929/2 "2024-11-21T13:30:24Z")

</div>

Power, GND and SDA… Bear in mind, you’re introducing a discrepancy between the cab and the chassis lean, that way.

---

<div class="post-metadata">

**Author:** ![BrianP](https://discourse.agopengps.com/letter_avatar_proxy/v4/letter/b/94ad74/32.png) [@BrianP](https://discourse.agopengps.com/u/BrianP)\
**Post date:** [21 November 2024 16:44 UTC](https://discourse.agopengps.com/t/remote-imu-connection/17929/3 "2024-11-21T16:44:19Z")

</div>

Okay thanks I’ve got a spare board,Teensy and BNO so will rig them up and try it before committing fully.  
Presumably you’re using the Bno on the board in Rvc,are you seeing much improvement?

---

<div class="post-metadata">

**Author:** ![andyinv](https://discourse.agopengps.com/letter_avatar_proxy/v4/letter/a/ecccb3/32.png) [@andyinv](https://discourse.agopengps.com/u/andyinv)\
**Post date:** [21 November 2024 22:37 UTC](https://discourse.agopengps.com/t/remote-imu-connection/17929/4 "2024-11-21T22:37:15Z")

</div>

No, and some have reported issues with calibration being lost with RVC. I’ve not seen it from anyone I know yet, but it’s entirely possible they haven’t noticed as not really getting much fieldwork done lately.
