# Simplertk-udp link

**URL:** <https://discourse.agopengps.com/t/simplertk-udp-link/6950>\
**Category:** Hardware\
**Created:** [4 September 2021 06:09 UTC](https://discourse.agopengps.com/t/simplertk-udp-link/6950 "2021-09-04T06:09:28Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![whiterose](https://discourse.agopengps.com/user_avatar/discourse.agopengps.com/whiterose/32/7716_2.png) [@whiterose](https://discourse.agopengps.com/u/whiterose)\
**Post date:** [4 September 2021 06:09 UTC](https://discourse.agopengps.com/t/simplertk-udp-link/6950/1 "2021-09-04T06:09:28Z")

</div>

Hello, I want to make ardusimple rtk over UDP, I have the converter in the photo, can I do it?

 ![dfdd](https://discourse.agopengps.com/uploads/default/original/2X/2/2069b5b491d45cb9285fc09ca28b808a84088965.jpeg)  
 ![sam](https://discourse.agopengps.com/uploads/default/original/2X/e/eccafee8b55e73bce2b06fbd6b9a987cbff246e9.jpeg)

---

<div class="post-metadata">

**Author:** ![m\_elias](https://discourse.agopengps.com/letter_avatar_proxy/v4/letter/m/94ad74/32.png) [@m\_elias](https://discourse.agopengps.com/u/m_elias)\
**Post date:** [4 September 2021 14:50 UTC](https://discourse.agopengps.com/t/simplertk-udp-link/6950/2 "2021-09-04T14:50:07Z")

</div>

Set f9p uart1 settings to same as tcp232 serial. Set f9p uart1 to the correct nmea output. Set tcp232 to the correct UDP settings. Wire it up.

---

<div class="post-metadata">

**Author:** ![whiterose](https://discourse.agopengps.com/user_avatar/discourse.agopengps.com/whiterose/32/7716_2.png) [@whiterose](https://discourse.agopengps.com/u/whiterose)\
**Post date:** [4 September 2021 17:39 UTC](https://discourse.agopengps.com/t/simplertk-udp-link/6950/3 "2021-09-04T17:39:34Z")

</div>

Thanks to you, I was able, thanks.