# Tile Mapping

**URL:** <https://discourse.agopengps.com/t/tile-mapping/4907>\
**Category:** Uncategorized\
**Created:** [14 April 2021 03:02 UTC](https://discourse.agopengps.com/t/tile-mapping/4907 "2021-04-14T03:02:20Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![FarmerNeil](https://discourse.agopengps.com/letter_avatar_proxy/v4/letter/f/76d3ee/32.png) [@FarmerNeil](https://discourse.agopengps.com/u/FarmerNeil)\
**Post date:** [14 April 2021 03:02 UTC](https://discourse.agopengps.com/t/tile-mapping/4907/1 "2021-04-14T03:02:20Z")

</div>

Hi, I’m wondering how best to use Agopengps to map where I have placed tiles this spring. Is there a way to make a permanent record of tile locations by driving the tile lines?

Neil

---

<div class="post-metadata">

**Author:** ![m\_elias](https://discourse.agopengps.com/letter_avatar_proxy/v4/letter/m/94ad74/32.png) [@m\_elias](https://discourse.agopengps.com/u/m_elias)\
**Post date:** [16 December 2021 00:58 UTC](https://discourse.agopengps.com/t/tile-mapping/4907/2 "2021-12-16T00:58:40Z")

</div>

Did you figure anything out?

---

<div class="post-metadata">

**Author:** ![NorthernFarmer](https://discourse.agopengps.com/letter_avatar_proxy/v4/letter/n/c0e974/32.png) [@NorthernFarmer](https://discourse.agopengps.com/u/NorthernFarmer)\
**Post date:** [16 December 2021 14:42 UTC](https://discourse.agopengps.com/t/tile-mapping/4907/3 "2021-12-16T14:42:04Z")

</div>

I guess you want to record the path only, cannot record the depth afterwards. Why not just record NMEA data first, AOG should be able to do that or any simple NMEA application. Post-process the data as you like afterwards.

---

<div class="post-metadata">

**Author:** ![m\_elias](https://discourse.agopengps.com/letter_avatar_proxy/v4/letter/m/94ad74/32.png) [@m\_elias](https://discourse.agopengps.com/u/m_elias)\
**Post date:** [16 December 2021 15:13 UTC](https://discourse.agopengps.com/t/tile-mapping/4907/4 "2021-12-16T15:13:36Z")

</div>

Set a narrow implement width (1m ?), and turn on section control as you’re driving along each tile?

---

<div class="post-metadata">

**Author:** ![FarmerNeil](https://discourse.agopengps.com/letter_avatar_proxy/v4/letter/f/76d3ee/32.png) [@FarmerNeil](https://discourse.agopengps.com/u/FarmerNeil)\
**Post date:** [16 December 2021 16:28 UTC](https://discourse.agopengps.com/t/tile-mapping/4907/5 "2021-12-16T16:28:42Z")

</div>

That is exactly what I did. Couldn’t figure anything else out. But at least I can use map to relocate tile if needed. Just straddled all the tile lines and made a map after tiling was complete.

---

<div class="post-metadata">

**Author:** ![m\_elias](https://discourse.agopengps.com/letter_avatar_proxy/v4/letter/m/94ad74/32.png) [@m\_elias](https://discourse.agopengps.com/u/m_elias)\
**Post date:** [16 December 2021 16:53 UTC](https://discourse.agopengps.com/t/tile-mapping/4907/6 "2021-12-16T16:53:02Z")

</div>

How did you install the tile or was it a contractor?

---

<div class="post-metadata">

**Author:** ![FarmerNeil](https://discourse.agopengps.com/letter_avatar_proxy/v4/letter/f/76d3ee/32.png) [@FarmerNeil](https://discourse.agopengps.com/u/FarmerNeil)\
**Post date:** [16 December 2021 21:05 UTC](https://discourse.agopengps.com/t/tile-mapping/4907/7 "2021-12-16T21:05:25Z")

</div>

Very DIY. I made a tool for my excavator. Worked well, depth control was difficult in really hard ground.