# Ublox F9P - Config for rover

**URL:** <https://discourse.agopengps.com/t/ublox-f9p-config-for-rover/308>\
**Category:** RTK Base Setup\
**Created:** [30 October 2019 09:27 UTC](https://discourse.agopengps.com/t/ublox-f9p-config-for-rover/308 "2019-10-30T09:27:08Z")\
**Posts on this page:** 1\
**Showing post:** 74

<div class="post-metadata">

**Author:** ![m\_elias](https://discourse.agopengps.com/letter_avatar_proxy/v4/letter/m/94ad74/32.png) [@m\_elias](https://discourse.agopengps.com/u/m_elias)\
**Post date:** [5 August 2020 12:56 UTC](https://discourse.agopengps.com/t/ublox-f9p-config-for-rover/308/74 "2020-08-05T12:56:51Z")

</div>

Yes, I get that too because of the different firmware versions as I mentioned earlier. This config was shared with me on the Telegram group just a few days ago.[simpleRTK2B\_FW113\_Rover\_AOrtner\_10Hz-01.txt](https://discourse.agopengps.com/uploads/short-url/okXH1rULMMvjSax3BloFarPyIa6.txt) (20.9 KB)

You might have to look through the settings and make changes according to what you need.

---

_[View the full topic](https://discourse.agopengps.com/t/ublox-f9p-config-for-rover/308)._
