Canbus on Case IH

[DaSepp]

Engage AIO boards via CANBUS

Morning all I’ve added some code so that you can use your tractor’s existing autosteer button to engage your all-in-one board, over CANBUS. So, if you’re using a Baraki valve, or powering a 12v motor, you can use this to save you having to wire a little button in. (Side note - you don’t have to pick anything like none, switch, or button in AOG; and those settings are still honoured if you want to use that button you wired in sometimes; this CANBUS engage is “in addition”) That code is in the…

Would give this a try.