Dana Spicer etc Aftermarket WAS for John Deere etc for 300 €

[wjr]

any knowledge in the community regarding the pinout and signalling of John Deere AL175214 (replaces AL150206 ) sensor?

looks good at the first glance, but contraciting in itself at the second:

John Deere 6R WAS connector

[20220108_174312][20220108_180711] In mi case BLACK=GND ORANGE=5V Green=SIGNAL

Factory 6 pin John deere WAS

Yes, I have it connected this way and it works good. It is like the landrover sensor, except for the pinout being different. I am running a 7330 high crop with factory WAS on left side. Using 1,2, and 4, gave positive steer value to right turn. I used 87% on Ackerman, which gave the same output far left to far right turn. That JD part number is AL175214, by the way. Also you could use pin 3, 5, and 6 but I believe the steering value would be reversed, requiring was to be inverted in aog.