Hardware
Section Control PCB Seeing as PCB is a top searched term on this site it must be time for a dedicated category. Whether building a Printed Circuit Board for the first time or if you have questions and suggestions to improve here is a place to share what you’ve learned or built. Antenna Placement and steering algorithm External Products Autosteer Steering Mount files Here’s a place to put pictures and links to 3D print files for steering mounts specific to make and model. Please post links to the .stl files stored at Thingiverse, Google Drive, Dropbox etc. as we don’t have a lot of space available on this forum. Hydraulic Systems If you have questions, problems or other things about Hydraulic systems, you can post it here. CanBus Tablet/Computer Suggestions or problems with your Tablet or Computer running AOG? Post it here!
| Topic | Replies | Views | Activity | |
|---|---|---|---|---|
|
Hardware buyer guide - wordwide
Like to start here an overview where you can get hardware. All-in-One Shop RTK - Hardware Motors and Controllers Sensors |
|
40 | 33217 | December 13, 2024 |
| About the Hardware category |
|
0 | 1308 | October 12, 2019 |
| WAS Parallelogram Simulator |
|
1 | 215 | August 13, 2026 |
| Coupure troncons auto avec Spraymatic 2 |
|
0 | 50 | August 11, 2026 |
| John Deere ATU 200 |
|
25 | 6400 | August 7, 2026 |
|
AIO v4.5 boards
v4.5 zip is in the PCB Build folder for each v4 Some ordering instructions Unzipped the files and also added ADS-MCP module files to support future RVC 100hz firmware. I recommend ordering the small ADS-MCP module al… |
|
461 | 41768 | August 6, 2026 |
| CanBus for Beginners - Super Simple |
|
1379 | 146748 | August 6, 2026 |
| Can you install hydraulic valves or CANBUS steering on any tractor? |
|
1 | 97 | August 3, 2026 |
| Mount PCB Enclosure with magnets? |
|
1 | 281 | August 2, 2026 |
| Section Control for sprayer |
|
2 | 362 | June 23, 2026 |
| Kubota M6 installation |
|
3 | 323 | July 31, 2026 |
| raspberry pi |
|
0 | 129 | July 30, 2026 |
| Using the Keya Encoder as the Wheel Angle Sensor |
|
22 | 1304 | July 25, 2026 |
| Calibration / Configuration issue |
|
3 | 146 | July 25, 2026 |
| All in One PCB |
|
1447 | 130898 | July 22, 2026 |
| Canbus PCB UDP issue |
|
10 | 635 | July 21, 2026 |
| Müller Spraydos x Teejet section control modification on Dubex sprayer |
|
16 | 927 | July 21, 2026 |
| Keya - parameter settings |
|
6 | 227 | July 19, 2026 |
| Dual GPS Firmware not working |
|
1 | 113 | July 17, 2026 |
| Canbus sprayer system controlled by Agopen |
|
13 | 655 | July 8, 2026 |
| Teensy 4.1 issue |
|
3 | 185 | July 6, 2026 |
| F9P not receiving NTRIP from Teensy (no RTK) |
|
3 | 72 | July 5, 2026 |
| v4.5 standard board: JLCPCB heatsink screw hole alignment |
|
1 | 130 | July 4, 2026 |
| V 4.5 micro. Board build |
|
2 | 352 | July 2, 2026 |
| Mueller SprayControl section control |
|
80 | 11296 | July 2, 2026 |
| New holland canbus |
|
94 | 4256 | July 2, 2026 |
| Speed pulse to Raven 460 rate controller |
|
5 | 201 | July 2, 2026 |
| Keya web configuration tool? |
|
0 | 123 | June 30, 2026 |
| PCB v4.5 questions |
|
20 | 853 | June 29, 2026 |
| Missing parts C32565 |
|
1 | 104 | June 29, 2026 |