Hello all, I was having issues getting my F9P to connect to AgIO via UDP even after reloading and updating firmware for Teensy and F9P as well as the 1.32 configuration file. After diving into the configuration in Ucenter, I was able to see that even after loading and saving the configuration, the F9P was still porting to USB rather than UART1.
If anyone is having trouble with this, they might go to the View tab in Ucenter and view receiver configuration.
From there go to PORT and choose UART1 with a baudrate of 460,800.
Hope this helps anyone who is spending as many hours on the forums as me looking for answers on F9P connectivity via UDP!