IP/ connection problem for steer module - conflict

Software
1

Hi guys! Strange problem here. I’ve been using it for a while. V6.3 all nice and good. Sometimes I had it difficult to connect the steering module to get it green. So today about to start again the day, and it doesn’t connect. On/off 100 times and nothing. Then out of nowhere it connects ( with rtk and WiFi off). Then i start a new line and I set up the hotspot to get the rtk fix going. And I see that I still don’t get rtk fix. So I enter in agio config, press again “fill in”and “set”. Now rtk fix appears and steer DISSAPEARED. There is a conflict somewhere and I don’t know where. Any ideas what to do? Thanks

2

Edit! I take out the antena cable. Press fill in then set. And now steering is green. I put back the antena , all of them are green BUT no rtk fix connecting. And the ip moved to steering instead of gps.

IMG_0718
IMG_07181206×1364 277 KB

3

Sounds like maybe you need to apply this fix.