The lenght is 670 mm.
Any mounts out there for older Deere tractors? Looking specifically 4960 or 8100 at this time. Great work. Thanks!
what motor or rpm are you using
JD 6330P séries 2008 possible to use on new R
Electric steering wheel with combination of metalic parts and 3dprinting
Video & files for laser cut and 3D printing
5 Likes
I am trying to get quotes for the laser cutting. How much did you pay to get them cut?
Hello
For laser cutting you can consider around 60-100€ and I do only in stainless because it is more precise cutting
It is not easy to give you more precisely because i do lot of proto parts for this tractor and the claas combine included Was Bracket and GPS bracket
What model of motor are you using?
I see is 12v
Thx
yes i use 12V motor connect to Cytron on Boad PCB V2
Motoréducteur CC, 1 085 tr/min 12 V c.c., 9 734 gcm, 38,7 W, ø 12mm
Purcharsed in electronic company similar as “digikey”,
It is not cheap but easy to get and fast.
french link :
https://fr.rs-online.com/web/p/motoreducteurs-a-courant-continu/0420625/
Uk link
https://uk.rs-online.com/web/p/dc-geared-motors/0420625/
other shop:
https://www.gotronic.fr/art-motoreducteur-mfa-986d41-12417.htm
https://fr.rs-online.com/web/p/motoreducteurs-a-courant-continu/0420625/
I already saw it on your youtube video
Dedicated for John Deere 6*30P or M&R model , just an update of the concept of Steering ( steel and TPU95) to be compatible with Philget motor 3269_2
Bracket is wider for this motor and some slot added to fix drive sensor
No test for my side but build with the expérience of RS motor
Link to dowload Files to print and cut
5 Likes
Tested the design on 6R.
Like the assembly, as it doesnt do hardly any harm to the steering column.
Also possibility to guide the cables trough the made “slots” into the steering column.
Looks clean.
Printed the motor gear falsely in petg not in tpu.
So did go the long way and redesigned the gears. Straight spur gears.
Adapts 1:1 to bricbrics design.
Printed with 100% infill in petg.
Hardly recommend the design with Phidgets motor.
At 24V runs very smooth in my opinion.
Feel free to give it a go if you like.
Greetings.
Thanks to bricbric.
3 Likes
^ Nice, do you have the drawing file for this? I’d like to adapt it to the Versatile / Steiger steering wheel
Uploaded the drawings.
If you plan to redesign them (bigger / smaller diameters) i highly recommend creating new ones with the spur gear addon of fusion360.
1 Like
I ended up modifying it in sketchup before seeing this post, left the gear the same but changed the layout of the mounts. Thanks
Looks really nice! So you did all the parts from 3d printed petg, no laser-cut stainless steel?
This should also fit for a JD 6120R (2017), right? Do you have your own 3d printer, or where did you order the parts?
Is there any difference between Phidgets 3269_3 and _2? Do they both fit into this setup? Do you know this website (https://www.dmmltdb.com/phidgets-32693-getriebemotor-24v-51kgcm-588rpm-4251-dc-getriebemotor-p-778896.htm)? Looks very cheap with no shipping costs for me, but I dont find anything about the website, doesn’t look quite trustworthy to me…
All PETG except the baseplate which is screwd to the steering column as seen in the video of @bricbric. Plate is steel. Printed it on my Artillery Genius. Came out pretty decent. There are also other good ones as well.
Should fit in all 6Rs and 6030P / 7430 / 7530 models.
6M models do have the older design of steering columns.
I redesigned only the back part of the machanism otherwise it wont hold up when 3d printed.
Its not perfect. Its on my list to redo it, but i can upload it if there is interest.
Bought the motor from autosteer.cc. Price is fine there.
Website from your post seems dubious.
Greetings.
2 Likes
Hello lui, could you kindly upload the 3D print file for the redesigned back part of the mechanism ? Thank you.
Its up. 
1 Like
Many thanks. Keep us updated if you have news. Great work. Best regards.
Few month pas and i improve my original concept to add more adjustement
The original system is keeping but now we can adjust the height or the angle to be more compatible
A slot for the switch is created
Because a lot of request to get printing version, i do two versions according imperial 10-24 or metric M5 screw ( require gear )
or if you like steel version you can get it to do laser cut
It is compatible with motor Phildget 3269 or MFA como drill 986D41 (Rs, gotronic , farnel…)
You can dowload here Files for clutch
This files included JD6030P or JD R solution but can be used to ther model of tractor or combine
you can dowload the steering gear to do friction type with steel or gear type with full3D printing
even if it is not the topic i already adapt to other tractor or combine (claas, mc cormick) by keeping the similar concept just need a bracket
Soon i wil post my solution of bracket for jd 00,10 … series by using this universal clutch
6 Likes