Overlap when round ab line

[Pat]

Hi
in V4.3.10 curve line are only translated.
There is the V4.4 “Daniel Unstable” with a real good AB curve feature.
It’s all discussed here:

AB curve overlap

Today I had a long curved field to drill that needed to be drilled with a curved side so I used AB curve for the first time. It started out ok ish but as i progressed across the field left to right it got worse at following the curve correctly. It was overlapping a full maize row at worst (750mm). It seems to happen in both directions. I eventually gave up and drove by eye and TBF made a far better job of it (cuttings at the right). Just wondering if I had something wrong or could alter somethin…