Refresh rate is very slow

Operations/Getting Started Getting Started
1

Hi, I’m finding my refresh rate very slow. It seems to update once per second.

Currently only using as a light bar type, no auto steer, no RTK yet (I haven’t had the need for it yet).

I read on another topic to check these settings, on ucenter which I have now changed.
Other than hitting send and save config, is there anything else I need to do as this has made no difference.

I have also read to try changing the baud rate, I’m not sure how to do this, if I change it in agio it stops receiving, do I have to do this via u center?

Thanks in advance!

IMG_2191
IMG_21911678×1461 1.38 MB

2

You can use use AOG-Config-O-Matic to config your F9P correctly

3

Thank you for your reply.
Configuring lets me connect, configure but won’t let me flash firmware. Is this essential?

4

Or simply change RATE: to 100ms ( 10Hz)

image
image602×586 17.1 KB

1 Like
5

Hi, I have just changed this now.

My agio is now crashing when I try to connect gps. Hopefully it’s an unrelated issue.

6

Did you read the readme file from the main page (Github), there are some instructions

The configuration only works with version 1.13

7

Working again, wow it made a massive difference. Almost too reactive, which i think is because i am not using rtk.
I might find a happy medium here.

8

I have settled at 200ms (5hz) at the moment and it is working nicely for me. If i hit a bump it seems to change direction quite a bit. But I’m sure that’s another setting.

Thank you very much @wland, you have been very helpful

1 Like