Some guidance in my pcb build

[cowhound]

Cytron Help Needed

The three pins will work without the cytron modification but with the mod you need to connect the nc pin to pwm2 on the board. You can use it the way you have it and just add the plug with the red wire to connect to pwm2 This is the standard board but the same idea [IMG_20240317_171727956_HDR] [IMG_20240317_152310495]

The plug itself that plugs in and then goes to the board. It might be obvious but I struggled a long time with the first one I did. The cytron won’t turn on after you do the mod unless that wire is hooked up. The cytron needs to be plugged into the headers in the board and have that white plug hooked up like in my picture.