Updated PGNs?

Gramstrup · 16 July 2024 20:41

Hey

Im looking for the updated PGNs for V6.3.3.

I can only fine the V5.7 PGNs in the PCB folder, and those dosen’t seem to match.

Davidwedel · 16 July 2024 20:48

AgHardware/Boards/blob/main/PGN.md

# Steer Module

IP = 192.168.5.126<br>
Hello = 126<br>
Port = 5126<br>
00 00 56 00 00 7E<br>


<table>
    <thead>
        <tr>
            <th nowrap align=center>PGN Name</th>
            <th nowrap align=center>Src</th>
            <th nowrap align=center>Dec</th>
            <th nowrap align=center>PGN</th>
            <th nowrap align=center>Dec</th>
            <th nowrap align=center>Len</th>
            <th nowrap align=center>Byte 5</th>
            <th nowrap align=center>Byte 6</th>
            <th nowrap align=center>Byte 7</th>

This file has been truncated. show original

This is the newest as far as I know.

Gramstrup · 16 July 2024 20:52

It dosen’t seem to match the output im getting from AOG. Im trying to read the xte for external light bar, but values dosen’t match

Davidwedel · 16 July 2024 22:04

Like pgn 254 byte 10?

Davidwedel · 17 July 2024 03:38

The code would sure point to PGN FE (or 254) byte 10 being the xte value

Davidwedel · 23 July 2024 00:51

Just checking, what port are you listening on? I guess AgIO sends to ip * . * . *.255, port 8888.

Gramstrup · 30 July 2024 20:00

I’m using USB, but didn’t know that steerswitch needed to be active for xte to change from 0xFF. It working like a charm now