Wheel Angle Sensor Installation Examples - Lots of Pictures

Mocked up a RQH100030 on a Claas Arion, seems to work well.

Used the Claas bracket to attach to the Carraro IFS axle, mounted this way the IFS doesn’t affect sensor.

Just waiting for a clamp to replace the temporary cable ties!

1 Like

Would anyone have more pictures or suggestions for a 4wd tractor? I’m having trouble picking out the photos and the large movement distance on the Center pivot seems like a lot.

A linear sensor might be best for pivots with a lot of travel


My instalation, indistructible :grin:

I jumped on it with my 110kg :joy:

5 Likes

I hope crossposting is okay:

we installed the WAS in this way, because our Case 895xl has a very short turning circle and therefore a gigantic wheel deflection, we solved it in no time, we can play with various mounting options, but this one works best


A linear displacement sensor availible on ebay for £40
Comes in various lengths to suit different length cylinders
how i did my mf7480

3 Likes

Its not good , linear is not for pistons with axial joint, becouse it turns over the time.

I’ll keep an eye on it,ive never noticed it turning before

Just attach it to the part that has the thread. That should never rotate.

1 Like

It is bolted to the chrome

Do you have any type number of this sensor?
I have a MF3050 where the cylinder can’t turn, so I’m planning to this route.
Have a displacement of ~260mm

this is who/what i used
Linear displacement sensor transducer position sensor scale 50-400mm | eBay
measure the length of your cylinder and buy the next size up is what i did

make sure there’s enough room over/around the cylinder to mount it, sensor body is approx.40mm square but theres nothing stopping you mounting it to the axle

CNH / New Holland T7.165 / CASE IH Puma 160 tractors:


Mounting WAS Honeywell RTY090 in the kingpin on a Valtra N92 mod 2011.

3d print from here: fichiers_stl [aogwiki]






elobau sensor on my massey ferguson 7475, 3d printed arm.

2 Likes


John Deere 6230 with RTY090HVNAX (Ordered 12V edition by misstake) and 3D printed adapter for 8mm rod
Adjusting the nuts for optimal utilization of range on the sensor

2 Likes

Jaki dokladnie czujnik wstawiony ?

wielhoeksensor, om de actuele stand (stuurhoek) van de stuurwielen te meten. meestal word daar een hoogtesensor van een auto (range/land rover) voor gebruikt, maar er zijn diverse mogelijkheden
het is eigenlijk gewoon een potmeter die 5V binnen krijgt en naar gelang de stand van de wielen 0 tot 5 volt terugstuurt naar het systeem

Huh pools denk naar nl??