Glad to share!
It’s not fancy at all. There is a lot of plastic in these tractors and I wasn’t excited about tearing the steering column apart so it’s just 2 steel plates held together with 4 bolts with. I have the steering wheel telescoped all the way out so the pinch plates are spread out over as much area as possible and the bolts are just snug. I’m sure you could over tighten it and crack the plastic but it’s really solid so far.
It’s attaches to the column similar to the bracket that Trimble makes for my model of tractor for the EZ Steer motor(pictured above) which is why I decided to try it this way. I figured if it was good enough for them it would hopefully work for me.