Pat
14 March 2022 07:30
1
Hi
I have 4 leftover of @m_elias SMD autosteer boards.
This is what I ordered from JLCPCB, should arrive this week. Thanks for the pcb design. Here’s a list of my changes:
Expanded analog input header to include a6 & a7, with +5V & GND for each
Added GY-BNO08X device (uses two of Adafruit BNO’s mounting holes), rearranged IMU pin labels
Added 4n33 pull-down resistors (p6 to gnd)
Added through hole jumper pins for BTS Cytron/IBT2 input jumper
Added smt LEDs/resistors for 12V in, 12V out, V+WAS, +5V, +3.3V, Opto outputs, PWM1/2/Dir,
Added diode to p…
They have only one little flaw: I put 0.125A diodes instead the 1A
They are worth 10CAD each and I would send by regular post to Canada or USA
I will probably just ask to buy 2 coffees per boards, to support the community.
1 Like
Kevin
15 March 2022 13:36
2
Are they assembled? Any pics? Thanks
1 Like
Pat
15 March 2022 19:44
3
No, just the board, built by JLCpcb.
I also have some BTS442E2 from aliexpress. All others parts can by ordered from Digikey.
How are they working for you? LED brightness good?
Pat
15 March 2022 23:46
5
Yeah they are working great and LEDs are good!
I will try to make photos or video of an assembled one tomorrow, with leds on!
Pat
19 March 2022 03:29
7
I give it for free. I will not use all 10.
I ask you to support the agopenGPS project by donate here instead (2 coffee/ 10 euro)
You can send me a Private message if interested.
system
Closed
28 March 2022 07:30
8
This topic was automatically closed after 14 days. New replies are no longer allowed.