CCW is my dad.
John Deere 7520
Thickness is ¼ inch. It’s holding the valve and a fertilizer pump so would be plenty thick for just the steering valve
Does anyone have any tips for adjusting the steering settings?
How much oilflow?
What to change when the tires are flapping?
what tractor?
Steyr 9095 MT (OC)
Thanks, it is very useful .
Bonjour, je vous ai envoyé 2 mails pour une valve mais je n’ai toujours pas de réponse… est ce toujours possible d’en avoir ?
Merci
Hello, is the manual online?
I use the pcb v2. Pressure sensor 12v or 5v?
I’m going to mount my valve, I use version 5.7.1 of AOG, what ino to put on the arduino? Thank you for your answers
The choise of ino file will depend on your hardware. What board do you have?
I have an official PCB V2 with a panda antenna in UDP
I think its this one you want
Hi @baraki
I want to order a CCLS valve-block for a Fendt Farmer 410 Vario com1!
How can i contact you?
Which settings work well in Valtra (Mezzo/Mega/T0)? Could I have a picture of the settings? Thank you!
I did some testing on one mega 8400 today and ended up with the settings:
Prop Gain 39
Max 110
Min 26
Not perfect yet, but good start
1 Like
Too low minimum PWM.
It will always be between 36 and 40
3 Likes
Recently, I have received a lot of orders and inquiries, so please be patient, we will try to answer everyone and send the valves. I hired a few new people to work so it should go more and more efficiently. I’m out of supplies at the moment. We process the blocks and wait for delivery.
On March 15, I have another delivery of parts and we will start shipping in order of orders. He is also working on increasing the scale of production because at this point in 1 week you order as much as we produce in a month.
18 Likes
Hi baraki
the valve arrived, thank you.
I send you an email and no reply