Looking for photo s of WAS fitting? Specifically on NH T6 if possible?!

Looking for photos of WAS fitting? Specifically on NH T6 if possible?!

Have a look to this: User baraki

Imgur

Imgur

Imgur

Imgur

Imgur

Carraro Axle, Claas Axos, Honeywell RTY Sensor

1 Like

Tm165 supersteer

IMG_20201202_084638~2_copy_1036x775

Tm165
More easy but angles are maybe not so good

IMG_20201202_084627_copy_1036x775

1 Like

Here’s one on a T6030:
image

Thanks for the detailed Pictures, may I ask why you used an additional linked arm and didn’t connect the first arm straight to the axle. I’m trying the same on a Claas Ares 696 and was wondering that.

So that all the angles that it has to bear do not affect it. In special variation on camber a angle.

So you mean to even out SAI and Caster like discribed in another post from you ?

Vili, could you share the .stp or .stl files with us?

:wink:

1 Like

No angles are already fine to be installed in the fender support, follow the king ping. It is so that when turning the efforts that the sensor supports are less. And Camber have a variation 10º.

1 Like

Has anyone fitted a delphi sensor to a new holland t6.155 with a non suspension axle