Massey 6614

[CommonRail]

CanBus for Beginners - Super Simple

Project Three - Steer the Massey Ferguson or Danfoss PVED-CL around the yard Ok, this project is for the Massey Ferguson system. When Massey Ferguson sell a steer ready tractor they use a standard Danfoss PVED-CL steering system, then you can use the Massey branded navigation software or any other 3rd party navigation to send the curve commands Via CAN-BUS. Step One: Load the Massey Ferguson navigation program onto the Arduino Uno, with CAN-BUS shield, with a pot connected to A0, and a switch…

CanBus for Beginners - Super Simple

Yes too easy. Only two CAN wires connected to tractor. I suggest first you order: 2x Arduino Uno 2x CAN shields 1x 10k pot 1x switch 1x button Build Project 3 (post 53 here) then you can test the tractor and turn wheels manually to see how it works. From there you can use AgOpen. All you need to use AgOpen is: 1x Arduino UNO or Nano 1x CANBUS Shield 1x BNO085 or CMPS14 1x GPS receiver EDT3, CAN 1 should be the steering bus. [image] Or into the AutoSteering connector [image]