Setting up gps to work via ethernet

[Pat]

F9P in ethernet mode

To use the simpleRTK2B or simpleT K3B card in udp mode, it is possible to add a serial UART TTL to Ethernet converter module such as this one or if you want to connect 2 serial port this other TTL to Ethernet Modules | UART over Ethernet Modules The 1st step is to configure the ardusimple card follow this link if you do not master the procedure F9P firmware update and config files it is necessary to transmit the desired nmea frame and receive the rtcm3 correction by the uart 1 to 115200 y…

Use the search icon at the top of the page.
There are some interesting results with “'ethernet F9P”