Itās set to 1m default (fix trigger distance) if you think of that or is there setting for reverse detection distance? will lower be a problem for working on field oscilations from line?
I think it works for both. Just from memory, so someone might correct me?
1 Like
I have just realised I didnāt have the f9p configured properly so it was only running at 1hz so will be interesting to see how it goes now
Yes, that will make a big difference.
A big part of the problem is my ability to not say no. Reverse detection allows using no imu and still detect which makes it all around poor reverse detection.
Need to change it so that if you donāt have dual or single + imu you canāt do reverse detection period. It will work a lot better.
Can a option be added to aog that allows us to use a switch or sensor for reverse detection. Perhaps we can use one of the optocouple for switch or sensor input.
The next version runs fine for reverse detection 
1 Like
Just looking at this with our install. Reverse detection not happy with multiple 3 point turns, which we do at each headland for our application. We are running at 1kmph so canāt hit 1.5kmph to reset direction.
We are running single f9p and IMU on 4.1 micro/teensy all-in-one board.
- No
- Front of cab 55cm ahead of rear axle. 273cm high.
- 1km
- 1m
Would adding a second f9p help ? Iām reading on the hardware wiki that it ājustā replaces the IMU.
Any advice appreciated before I resort to more spending.
Cheers,
James.
Try 5.7.3.1, all reverse problems solved.
1 Like
Thanks Vili.
Can you detail that a bit more please by how I would solve my issue in the new version ? Currently running 5.7.2.
You donāt have to do anything, just use 5.7.3.1., after several months with it, Iām still waiting for the detection to fail.
1 Like
Thank you Vili. So no new updates to the teensy? Just run the exe on the tablet/laptop ?
Just run.
P.D : Anyway, I would like all of you who use 5.7.3.1 give us your opinions
I will try today, i like new options 
1 Like
Testedā¦ on 5 vehicles.
Like you still waiting for the 1st time having a heading error.
I think it works flawless.
5 Likes
Tried it yesterday on a combine, works flawlessly. Its time to update the rest of the squad. 
1 Like
Have also tested 5.7.3.1 today, works flawless for me.
1 Like
Tested, direction detection works perfect , but steereng is lettle better at 5.7.2.
When tractor wiggles 5.7.2 is more stable.
On new version when i go thru some hole in road with both version tested , 5.7.2 turns little bit, but 5.7.3.1 a lot.
Roll filter is 0 on both version.
I miss yellow square in the middle.
It whood be realy nice if there is phisycal button for centering ab line.
Very useful in plowing.
1 Like
hot key P is not enouth ?
with virtual keyboard you can play with
1 Like
Yes 5-7-3-1 overly aggressive with roll compensation.
