Edit: does your roll change when you tilt your PCB / MMA?
Dir is just for direction 0 is left 5 V is right Or opposite depending of your motor.
But why not change to V 5 now only thing you miss is the roll from the mma.
I did all this season seeding without rool activated just used heading for helping keeping stable heading.
I have a bno085.
You should watch this video if you want to stay V4
Hello Lars
I have seen the videos and read a lot
My conclusion seems to be : the steer switch is faulty
the information does arrive to the cytron but nothing happens
the sentence from the autosteer is
127,253,690, 0, 0, 20, 7, 0, 0, 0
and Brian indicates that I should have a 5 instead of 7 on his video : I see him click on his button (the autosteer switch or button on the schematic ) and 7 turns 5 and so on
I made a mistake somewhere and don’t know where ( or why ) the autosteer button don’t work
thanks bruno
Lars,
I was sure it was all about a mistake: and you are right they do are opposite !!!
I knew the little thing not to do with the optocoupler ;but I did it
Does the optocoupler crash when « opposite « ?
I shall try the system tomorrow and report plus I take a picture of the PCB
thanks anyway
Bruno
first the optocoupler is ok
everything is fine now !
I got to fine tuning the count per degree
and try outside -wait for some good weather .
Join a photo of the PCB : one cannot see the way the optocoupler is mounted
Have you a motor - say less expensive - cause taxes ,fees and UPS double the cost : nearly 160€
I mean a motor I can find in europe ?
Is your bno085 for sale :any chance ? (Am not so sure of what I am saying in english so excuse me )
In case I would send my mail
Lars ,
Perhaps the last question: the roll is erratic
sometimes I have the information , the next time nothing happens
I choose the MMA
Is there something special about the "configuration "
seems to me to get worse when I try to fix the trouble
Thanks
Bruno
lars
How to migrate for V5 : is there a discourse-page with all the schematics
the one I found on Github/farmerBriant looks like the V4 and nothing about bno085
I mean where do I pin on the PCBv2 and on the bno?
bruno
@Aortner
Sorry for the question, but I can´t see any of your images.
Is the server where the pictures were stored no longer active?
Can you please re-upload the images?
Thank you in advance.
Welcome Klaus.
You are new here so you wouldn’t know that discourse was moved to our own server a couple of years ago. Files from before has gone hiding in the sky
But if you look for the new wiki go to github.
