Hi, I control NH 7.210 using Baraki valve, because I don’t have preparation for control, so I don’t use CANBUS yet. I would like to know the position of the three-point hitch via CANBUS and therefore use a work switch. I prepared pins 16-19 CANH1,CANL1,CANH2,CANL2 for the Ampseal connector in AIO.
Honestly, I haven’t read much yet, so I ended up wanting to learn how to read CAN CANBUS sniffing - for beginners. Unfortunately, this thread is already closed. Can someone please advise me?
I understood that CANBUS sniffing will not work via a classic OBD usb cable from ebay.
So I think the easiest way would be to use the Teensy that I have in AIO. I understood here: GitHub - lansalot/AOGConfigOMatic: A tool to configure the hardware components for AgOpenGPS that I can only finish the tool and at the same time not break the existing Teensy installation with AOG? That tool is AgOpenGPS-Tools/TeensySLCAN at main · lansalot/AgOpenGPS-Tools · GitHub ? And then I connect SavvyCAN to it? Do I just expand Teensy with this procedure or reinstall it?
I’m a bit lost in the issue, thanks for the help.