Do you have a cytron board to run the valve? I donât see it on the main 4.5 pcb?
what do you think ?
Are you using ânormalâ autosteer while standing still? Then no 12 v!
If you use the manual steer setting in expanded autosteer setup, then you should have 12v.
excuse me, I donât understand
I press key 1 which turns green but pressing arrows 2 nothing happens.
Excuse my English (google translator)
Do you have 12 V on 6/2 valve (pin 7) when key 1 is green?
And you have pressed the send to send setup ftom AOG to PCB (teensy )
No, not 12V on pin 7
Yes the 3 are green
Most farmers in Europe are asleep at this time 
1 Like
Yes, switch
No, not all !!!
1 Like
I donât know if that has anything to do with it, but the remote control via pin 8 does not control the GPS engagement, the âsteerâ LED lights up but that doesnât change anything on the screen.
Have checked out the video training? I believe this is covered in the operations video.
https://www.youtube.com/playlist?list=PL1N2N2XFHWW1fIDhb7koOa7hxH0LGppYc
What letter is next to autosteer toggle icon is it M(manual) or R(remote)?
Are you supplying ground to pin 8?
Over steer switchâŠ